Info for Weatherstation Operating- and Data Acquisition Software Status: 2023-04-27 Distinguished to the full-version/registered version: ----------------------------------------------------- - only 180 minutes of online-operation = recording of the weather-data (The representation / view is not effected by this) in order to continue recording after it, you must start the program again... - Stores the altered values of "internet settings" - that is alterations are here only in the full-version meaningful. - in the Html tables also the min./max. values presented! - with the Htm tables, own remarks are possible - otherwise here is a hint with "restricted version" passed out. - Partial remarks with "restricted version" become in the restricted version in the Html-tables passed out. - all "automatic" is not possible - Timing control conditionally only possibly. - Command line parameters are ignored - all "automatical" - from V2.98.0 the program doesn't admit any more endless test-time. the test-time limit depend on the available monthly data with data of 2 years, the test-time limit is the shortest. beginning a 1 month before the end of the test-time is reached, you get a corresponding messages! EXE-file differences: WsWin32.exe -> functions only with available lame_enc.dll -> absolutely necessarily WsWin32ns.exe -> version without speech output support (ns=no speech) - lame_enc.dll not necessary Program-help for Vista/Windows7/8/8.1/10: As of V2.98.5, Wswin can be used for the supported languages (DE, EN, FR, IT, NL, CS, ES) to correct this. Update: from V2.94.1 on, a update file can be installed only, if a corresponding pre-version is found. If the Update is rejected, the Update alerts to download the complete-version! Remark about the using of the Hibernate (sleep)-mode during Wswin runs: Since the version V2.97.3, Wswin takes into account if the computer was in the sleep state, without that Wswin previously was closed (online-operation ran further). The "sleep-mode" was only taken into account from Wswin if the computer "slept" longer than 1 hours 12 minutes. -> this is recorded by force in the errorlog file WSWINERR.TXT. From this version on, the program informs, if it "finds a possible gone ahead sleep-mode" which not more than 1h 12min lasted. One then has the possibility to cancel the online-operation, or the program go further automatical after a solid Latency of 5 minutes (300 seconds). If you activates with the WS2500 station the calculation of the solar radiation, it can be necessary, to choose another station (for example WS2000) and to pick after it the WS2500 again! For the calculated solar radiation values (only with WS2500 and brightness sensor possibly), is system-induced no recording of Long Time values possibly! Version History: ---------------- Known Problems: since V2.80.2 with introduction of a posted component version, WsWin32 does not react again anymore to the Windows-embassy "program termination/closing" !!! That is, the program WsWin32 must before Windows new start/-termination are self ended. Consider: For most calculations is a 24h-Showing and/or dates of at least 6 hours necessary !!!! Since V2.93.8 switches the program by force to the 24h-View in such a case The correct time-zone-values are necessary. The correct location coordinates are necessary. When you see under "Help" "About ..." a "current memory utilization" value over 95 %, you should upgrade the RAM and/or end other programs. From the version V2.78.0 on the default setting is "without interface". That meant for you, if you start this software for the first time: You must choose first the corresponding weather station/Wireless PC interface, deselect "Operation without interface" and then control/select a valid COM-interface. Possibly after that, you should restart the program! V2.99.9.0 2023-04-27 - new variables: Power %ws_calc[^]=v1~v2~decimals% and %ws_calc1[^]=v1~v2~decimals% Mem Power: %ws_calcmem2[^]=mem1~mem2~decimal places% mem1=1..128, mem2=1..128 V2.99.9.0 2022-08-08 - Option, if CustomAlreadyOpen occurs, the program will restart. V2.99.8.9 2021-11-15 additions! - Fixed error when merging over several months. - When exporting, Windchill and Dewpoint are now also exported (but depends on the selected export type) - The variables with time calculation have been switched to higher accuracy (from single to double) Such a calculation gave a wrong result before the change: %ws_calc[-]=%ws_year%%ws_month2%%ws_day2%~1~0% V2.99.8.9 2021-07-01 additions! - The data from the additional sensors (including inside) are only transmitted to Awekas if the corresponding HTML flag is set V2.99.8.9 2021-05-29 additions! - The variable %ansitoutf8_on% is now also supported in the custom and wap files! - www_templates now also support sending with Curl.exe via GET - provides two new www_templates: www_template_windy.txt - data are sent with GET www_template_windyjson.txt - data are sent with POST V2.99.8.9 2021-05-04 (as trial version V2.98.8.9) - Fixed Netamo bug: The entry for -t and -d was not saved! - Fixed Export error: One File with date selection - nothing was exported! there is now a new option here "weewx" - so such a file can be taken over there directly with the corresponding wee_import-conf. - Bug introduced with V2.99.8 at the variables %season_frostduration and %season_drynessduration removed - new variables - see ws_variables.txt with the identification V2.99.8.9 - New function for the www-templates: 1Typ=2 - see: www_template_example_en.txt using curl.exe This requires curl.exe, which is normally included in Windows 10. curl.exe -> https://curl.se/windows/ You have to enter the path to curl.exe under Internet, Settings, tab www (or confirm with Windows 10). - Support of weather365 or meteo-services.com with wap file or www template (use of curl.exe) - new option "ErrorWait" at WWW (also applies to Awekas and Wunderground): 2 (= default) - as before - after 3 errors there is no attempt to send for the next 2 hours 1 after 3 errors, there is no attempt to send in the next hour 0 Error checking switched off (setting not recommended !!) - Support of API 4.1 at AWEKAS (more sensors) - via an entry in the wswin.cfg, section [Weather], entry AwekasFile=Y:\Web\weatherstation\airextra.txt (here example) and path to the file with the Air Quality Sensor data, this data (e.g. from DAVIS Airlink) can also be transmitted. File with Air Quality Sensor data should look like this: &AqPM1=16.97&AqPM2.5=27.76&AqPM10=28.97&AqPM2.5_avg_24h=26.03&AqPM10_avg_24h=28.82 (single line !!) This file can be generated automatically by my php script "wetterstation.php" for DAVIS Weatherlink Live and DAVIS Airlink! - Change at the next solar-/lunar-eclipse. Because some were overwhelmed when the event was less than 28 days old and therefore the last occurrence was shown with an indication of when the next event will be displayed. - User name has been removed from email settings (was Sending on behalf), as it was used for certain E-mail services (e.g. 1und1/ionos) the sending was rejected. New help program "mailsend-go.exe" https://github.com/muquit/mailsend-go/releases, must be present in the Wswin folder (e.g. save under C:\Wswin), which supports directly SSL-sending via option (Stunnel no longer necessary), further options (e.g. file attachments, recipients from list) can be stored in a file mailsendconfig1...5.cfg V2.99.8.8 2020-06-09 (as trial version V2.98.9) - New variables: Get text from any file %calc_off_file=%%Path\Filename% Don't taken over empty lines ON %remove_empty_line_on% Don't taken over empty lines OFF %remove_empty_line_off% -> default Use Html-Return (
) in lists output %ws_htmlreturn_on% Don't use Html-Return (
) in lists output %ws_htmlreturn_off% Season Ice+Summerdays %season_coldwarmdays[ddmmyyyy~DDMMyyyy]% Season days <0 + >=20°C %season_cold20warmdays[ddmmyyyy~DDMMyyyy]% Season days <0 + >=15°C %season_cold15warmdays[ddmmyyyy~DDMMyyyy]% Season days <0 + >=10°C %season_cold10warmdays[ddmmyyyy~DDMMyyyy]% List days <0 + >=25°C %season_l_coldwarmdays[ddmmyyyy~DDMMyyyy]% List days <0 + >=20°C %season_l_cold20warmdays[ddmmyyyy~DDMMyyyy]% List days <0 + >=15°C %season_l_cold15warmdays[ddmmyyyy~DDMMyyyy]% List days <0 + >=10°C %season_l_cold10warmdays[ddmmyyyy~DDMMyyyy]% List Difference xx°C %season_l_diffxxdays[xx~ddmmyyyy~ddmmyyyy]% xx: 15-30°C Season DayMinValue %season_l_daymin[id~ddmmyyyy~ddmmyyyy]% Season DayMaxValue %season_l_daymax[id~ddmmyyyy~ddmmyyyy]% Season DayMinMaxValue %season_l_dayminmax[id~ddmmyyyy~ddmmyyyy]% Season DayMaxMinValue %season_l_daymaxmin[id~ddmmyyyy~ddmmyyyy]% Season DayAvgMinValue %season_l_dayavgmin[id~ddmmyyyy~ddmmyyyy]% Season DayAvgMaxValue %season_l_dayavgmax[id~ddmmyyyy~ddmmyyyy]% V2.99.8.7 2019-10-17 (as trial version V2.98.9) - Optimization when importing the data from one file - Enhancement of merging capability - Monthly and several months allowed - Ability to export individual sensor values from selectable months to one file (for example, for later merging) V2.99.8.6 2019-10-04 (as trial version V2.98.9) - support for wap-smartweather-x1.txt -> mobile website(s)   For information see info-smartweather.txt - For the wind direction display you can now select "Point" for all views. - new variables: day of the week %ws_weekday[dd~mm~yyyy]% 1..7 (1=Mo) certain rel. date %ws_datex[xxx~dd~mm~yyyy]% V2.99.8.5 2019-09-11 (as test version V2.98.9) - new variables for wswin-analyse.txt - new variable: Estern +- x-days %ws_easterdatex[xxx]% V2.99.8 2019-09-04 (as test version V2.98.9) - Integration of wswin-analyse.txt If present, this file will only be processed once a day or after a change of setting V2.99.8 2019-07-25 (as test version V2.98.9) - revolve bug with tropical nights at the 1. day of a month V2.99.8 2019-06-25 (as test version V2.98.9) - new variable %calc_save_time=x%%###% -> x = 0 = always, 1,2,3,6,12,24 -> hours   Data is recalculated here only selected hour, otherwise fetched from file. - Fixed bug with 2nd leaf moisture sensor = ID26 (Leaf). - For the leaf moisture sensors the autoscaling did not work -> corrected. - Possibility of replacing erroneous values with a single value without the need for a CSV export file    -> File, Import weather data, here Merge and the option Measured value.     You can specify the period and the corresponding sensor and sensor value. V2.99.7 2019-05-20 (as test version V2.98.9) - Customizations for wswin-custom-x.html - Support for non-Ansi files (UTF8, UTF16 ...) even with file watching - so far only importing unsupported! - Change in the configuration of NetAtmo stations.   If someone replaces his additional sensor 1 or 2 (with 3 or 2 additional sensors), then the module order isn't anymore correct   and the sensors are assigned to a wrong ID. You can now configure that, that the previous ID is retained.    V2.99.6 2019-05-09 (as Test version V2.98.9) - Possibility to create the user-defined file "wswin-custom-x.html" timed (currently, 5,10,15,30,60 minutes). - The representation of the graphics (aktull.gif, yesterday.gif, week.gif, month.gif) at wswin-custom-x.html must be activated and   can also be activated only if the generation of the mentioned graphics is also activated. - When the user files are processed, the edited line is now (always at wswin-custom-x.html, otherwise from the 1000 line)   displayed in the status. - Correcting tropical nights V2.99.5 2019-04-22 (Test version V2.98.8) - new Command Line parameter /PID - Wswin then enters in the WSWINERR.TXT-file (if error log is activated) the process ID of running   Wswin program. - New Help menu entries: Variables and Variables Basic Course.   With "Variables" the file ws_variables.txt is displayed.   With "Variable Basic Course" the file ws_var-kurs.txt is displayed, which is provided by the variable guru Matthias Krücke   and maintained. - In the case of X_CSV import, "AM or PM" is now also supported in the time definition, thus supporting the   Weather Station Froggit WH4000SE   - The config files wswin_x-csv_wh4000se_wm2.cfg or wswin_x-csv_wh4000se_lux.cfg are also included. - Fixed bug with WetBulb. - At Netatmo, at the beginning of the new month file, the new file will always be set to always use this file with the   Data of the first day of the month starts (or from existing data of the month) - Introduced protection that tries to create blocked files anyway. - Ability to disable the solar correction with a VantagePro!   Background: Wswin controls the max. possible solar radiation according to the location. If too high values are reported here,   these values are automatically reduced (solar sensor cooling problem ...). - Internationalization option -> Menu: Control, internationalize user files   The program can translate texts via a translation file wswin_language.txt   and/or additionally by replacing via resource variable - Wswin (Author Matthias Krücke) now provides a special evaluation file:   wswin-custom-x.sec (is protected), the processing is independent of other user file (own activation option)   This file is available for all supported languages (DE, EN, FR, IT, NL, ES, CZ).   Online example: https://www.pc-wetterstation.de/wetter/wswin-custom-x.html (here German) Here you can find the actual necessary graphics: http://www.woldegk-wetter.de/wswin-downloads/usericons.zip   Are also in the \prg\user directory and are also installed locally at first installation, but then no longer   updated, so that any OWN graphics are not overwritten.   Settings and help: info-wswin-custom-x.txt   Requirement: only with "metric units" setting V2.99.4 2018-09-03 - Support for AWEKAS API V3 (FastLink) - but minimal 1 minute! - New vaiables-type list: List Ice days %season_l_icedays[ddmmyyyy~DDMMyyyy]% List Frost days %season_l_colddays[ddmmyyyy~DDMMyyyy]% List Cool days %season_l_cooldays[ddmmyyyy~DDMMyyyy]% List Summer days %season_l_warmdays[ddmmyyyy~DDMMyyyy]% List Hot days %season_l_hotdays[ddmmyyyy~DDMMyyyy]% List Days <= %season_l_uldays[ddmmyyyy~DDMMyyyy]% List Days >= %season_l_uhdays[ddmmyyyy~DDMMyyyy]% List Frost grow days %season_l_frostgrowdays[ddmmyyyy~DDMMyyyy]% List Rain days %season_l_raindays[ddmmyyyy~DDMMyyyy]% List Rain days >2mm %season_l_rain2days[ddmmyyyy~DDMMyyyy]% List Rain days >5mm %season_l_rain5days[ddmmyyyy~DDMMyyyy]% List Rain days >10mm %season_l_rain10days[ddmmyyyy~DDMMyyyy]% List Rain days >20mm %season_l_rain20days[ddmmyyyy~DDMMyyyy]% List Days User3 %season_l_u3days[ddmmyyyy~DDMMyyyy]% List Days User4 %season_l_u4days[ddmmyyyy~DDMMyyyy]% List Days User5 %season_l_u5days[ddmmyyyy~DDMMyyyy]% List Trop nights %season_l_tropndays[ddmmyyyy~ddmmyyyy]% List Days <= %season_l_uldaysx[ddmmyyyy~ddmmyyyy~vvvvvN]% List Days >= %season_l_uhdaysx[ddmmyyyy~ddmmyyyy~vvvvvN]% List Rain days %season_l_raindaysx[ddmmyyyy~ddmmyyyy~vvvvv]% V2.99.3 2018-05-07 - Changed to https://www.pc-wetterstation.de V2.99.1 2018-05-04 - Consideration of any sensor data order at NetAtmo weather stations (since 03.05.2018) -> Generation of wswin_x-csv_import.cfg V2.99.1 2018-04-28 - additional variables: Last rain desert startT %LT_YearNoRainDateStartT% Last rain desert startD %LT_YearNoRainDateStartD% Last No Rain end Time %LT_YearNoRainDateStartendT% Last No Rain end Date %LT_YearNoRainDateStartendD% Longest frost beginTime %LT_YearIceDayDateStartbeginT% Longest frost beginDate %LT_YearIceDayDateStartbeginD% Longest frost end Time %LT_YearIceDayDateStartT% Longest frost end Date %LT_YearIceDayDateStartD% V2.99.1 2018-04-11 - Consideration of the changed sensor data sequence in the indoor sensor at NetAtmo weather stations (since 2018-04-10) -> Generation of wswin_x-csv_import.cfg V2.99.1 2018-04-09 - For Netatmo stations the processing/representation of the wind gust direction was not realized everywhere has been corrected now! - Treatment of feedback for the "WWW" Weather Network Services has been changed: if 8Success= is not defined - no defined text feedback comes or "success" or "OK" is included in the feedback, the sending is treated as "successful" (no error counting increase) - or 8Success= defined the feedback does not match this text, but contains in the feedback the words "success" or "OK" so the sending is treated as "successful"! V2.99.0 2018-03-24 - possibility to export the daily data (value, min, max) of the available sensors,   for monthly data and annual data in addition to the "available sensors" further values (such as cold total, heat sum, etc.)   With selectable period (Monthly) - Default set is: Recording start YYYY=Start year mm=Start month -> File, Exporting ..., Export weather data    -> "1 File: Date days" the file is stored in the export directory -> file name "exp_dYYYYmm01.CSV".    -> "1 File: Date month" the file is stored in the export directory -> file name "exp_mYYYYmm.CSV".    -> "1 File: Date year" the file is stored in the export directory -> file name "exp_yYYYY.CSV".    If you use Microsoft Excel (tested with Excel2010),    use as separator ";" and for separator month file ";0,1;" (middle selection)    So you do not need to define the convert format    -> Double-click on the CSV file to display the file directly in Excel. - Support for Netatmo weather station using the utility "NetAtmoXML.exe"   Since sporadically missing data occurs here, these data generally are   plausibility checked (can be switched off)   Changes in the plausibility check for Netnetmo:   If internal temperature and air pressure are faulty, all other values will also be faulty   set -> here not all data was received by Netatmo and the order of the data is   indefinite -> the last valid received record is used here   -> always provided that the plausibility correction is activated!   During file monitoring and change of month, the monthly file is renamed after the data has been transferred   -> filename_yyyymmddddhhmm.csv - this will start again with an "empty" monitoring file   - where filename is the name you set - mostly netatmo   - yyyymmddddhhmm is the last read record of this file - for Weather.com is now forced to use the API50 interface at startup.   You can turn off the use again until the next program restart, but in one of the next updates   this possibility will also be omitted.   Without API50, the new sending protection measures will not apply here! - New option for sending weather data to weather services   - The data is sent in the rhythm of saving a new data record!   for Wunderground (or just Time controlling2): under File, Options, tab "Time controlling 2" in the field "Extra" the option "A"   for the WWW pages: under Internet, Adjustments, tab "WWW" in the field "Internet Update" the option "A" - Additional protection for weather networks.   After 12.5 seconds, the Weather Network should have "answered", if that is not the case, after 15 seconds   or if not answered positively, an error is counted for this network. After 3 consecutive errors   no more attempts will be made for this network for then next 2 hours.   Necessary therefore for the "www" series that the entry (8success=) is defined here.   For "WWW" weather networks, you can now set the transmission interval for each individual weather network. Global=default or   the specially selected interval (5m, 10m, 15m, 30m, 1h, 2h, 3h, 4h, 6h, 8h, 12h, 24h) - Possibility of changing the display in the min./max. Bar at 24 hours daily view - show only the min./max values of   current day -> click on sensor - if the current day display is active then "Sensor Day" is displayed! - Possibility of changing the display in the Min./Max. Table at 24 hours daily view - show only the min./max. Values of the   current day -> option "Day Data" - VantagePro and Netatmo now also show wind gust directions in the table. - new Variable(s): Value in percent %ws_state_0-100[wert]% 0-10->0, 11-25->25; 26-50->50; 51-75->75; 76-100->100% using exmaple: for battery fuel ApparentTemp %ws_apparenttemp[temp~hum~wind]% Heat Index Outdoor %ws_heatindextemp[temp~hum]% Virtual Temperature %ws_virtualtemp[temp~dewpoint~baro]% Wet bulb %ws_wetbulbtemp[temp~hum~baro]% SummerSimmerIndex %ws_ssix[temp~hum]% Values only for current Year -------------------------------------------------- Last rain desert start %LT_YearNoRainDateStart% Last No Rain end %LT_YearNoRainDateStartend% Time without rain %LT_YearNoRainDuration% Time without rain #%LT_YearNoRainDuration[1]% Longest frost begin %LT_YearIceDayDateStartbegin% Longest frost end %LT_YearIceDayDateStart% Duration longest frost %LT_YearIceDayDuration% Duration longest frost #%LT_YearIceDayDuration[1]% Max Rain/hour %LT_YearRainHourMax% Date Max Rain/hour %LT_YearRainHourMaxDate% Time Max Rain/hour %lt_YearRainhourmaxdatetime% MaxChange pressure 1h %LT_YearBaroMax1h% Date MaxChange pr. 1h %LT_YearBaroMax1hDate% MaxChange pressure day %LT_YearBaroMaxDay% Date MaxChange pr. day %LT_YearBaroMaxDayDate% MaxChange pressure 24h %LT_YearBaroMax24h% Date MaxChange pr. 24h %LT_YearBaroMax24hDate% - Further adaptation with VantagePro with solar sensor and cooling problem (nonsensical values at night and too high values during the day)   if the sun's position was >= -3 and 0 degrees, the program logged a bad value in ws_debug_solar.txt   but not corrected - is done now   In addition, an ET value for bad solar values is now set to 0.000 during the night, to 0.75 percent form the value received during the day. - Representation for Long time values for current year   -> Weather, Statistics dates, tab Long time values - here you can switch between Long Time and current year   Attention! Changes made in the year presentations are not taken into account or adopted.   For a valid value in rain/h all days have to be scrolled through since the beginning of the year in daily presentation!   The data for this comes from the year-file, with changes to be accepted the year-file has to be updated!   If the year is selected and creation of the Long time graphics are activated in addition to longtime.gif   also generated a longtimeyear2018.gif (for this year). - new option in the wswin.cfg: KillAlways=1 (in the section [Options])   If this is set to 1, Wswin tries to forcibly end a "hanging" Wswin after 30 seconds via a batch file   The Windows own program "Taskkill" is used here - therefore corresponding user rights are required here!   is logged in the WswinClose.log file    V2.98.8 2017-05-15 - Bug with data before 1980 fixed (including summer time consideration before 1980 - there was not yet a summer time!) - Problem when processing custom files between 00:00 and 01:00 and update time<>0 fixed. V2.98.7 2017-03-16 - for the TE923 stations you can specify the hardware version, memory size and interval (hard coded). -> workaround for "dying stations" which provide something different for each query. - the Wswin_TE923usb.exe utility was replaced by a program-internal solution. -> the false alarms of the "useless" virus scanner should be a thing of the past V2.98.6 2017-03-03 - Debug-Mode at "odd" Solar values V2.98.6 2017-02-23 - new variables ... %curvaldatetime[id~x~dd.mm.yyyy~~hh:nn]% -> at setting Date Time - Access to each data value %curvaldatetime[id~x~hh:nn~~dd.mm.yyyy]% -> at setting Time Date - Access to each data value %datepast[dd~mm~yyyy]%-> Output always in the format dd.mm.yyyy %season_monthmin[id~mm~bbbb~eeeeS]% -> Month(year) average of the mean values: for all IDs except 34,37,39,40 %season_monthmax[id~mm~bbbb~eeeeS]% -> Month(year) average of the mean values: for all IDs except 34,37,39,40 %season_minavg[id~ddmmyyyy~ddmmyyyy]% -> Season Minimum daily average: value %season_minavgdate[id~ddmmyyyy~ddmmyyyy]% -> Season Minimum daily averages: date %season_maxavg[id~ddmmyyyy~ddmmyyyy]% -> Season Maximum daily average: value %season_maxavgdate[id~ddmmyyyy~ddmmyyyy]% -> Season Maximum daily averages: date %season_day*[0~00000000~00000000]% -> affects all season_day variables - Change! Now also relative references possible %season_idldaypx[id~ddmmyyyy~ddmmyyyy~vvvvvvT]% -> Comparison type "T", the earliest day of occurrence of these values is output %season_idhdaypx[id~ddmmyyyy~ddmmyyyy~vvvvvvT]% -> Comparison type "T", the latest day of the occurrence of these values is output %season_idldaypx[0~ddmmyyyy~00000000~0000,0T]% -> for first/last frost day over total time period - Access via variable (%curvaldatetime[id~x~dd.mm.yyyy~~hh:nn]%) or program (under Weather, Weather forecast and here tab "Statistics") to any existing data value - Support for encrypted user Files/Templates - this file has the extension ".sec" - according to the producer of such a file, variable entries are unreadable -> change protection! - Change for restrict limit when creating "Update graphics/tables" of the start year from 1980 to 1939 - TE923 (and OEM's) Problem with the gap when reading the logger narrowed - for the "ws_newdata", the solar time is now also calculated and listed. - Error with merge and id = 35 (wind speed) eliminated. - Merge New: id = 135,136,238,141,142,145 - The merge data is only accepted if there is no online data. - Generation of wedaal.txt removed - since this weather service is stopped. - Wetterarchiv.de/Wetter.com switched to API5 Removal of the monthly transmission data, because this data are since 2016 by Wetterarchiv.de not longer are accepted - the value for the customfiles has been increased from 20 to 60 (only for values below 60 the value is increased!) - Provides a help program (Wswin_TE923usb.exe) which can solve the USB problems from Windows8.1 on directly from Wswin: find this option under Weather Station, Interface and then this menu point "correct TE923 USB -> reboot!" This entry is only visible for operating systems (Win8.1 and above) and the Weather Station is not found -> Confirmation of user account control (running as an administrator) is essential! -> This help program may be identified as a Virus and/or Spyware/Malware program "trust or exclude from checking" this program or make the changes in the Windows registry, described in the program help, by yourself! -> After a successful change in the registry a reboot of the computer is carried out! - If the help function (.hlp file) was deactivated by Windows, you can now reactivate it from Wswin: To find this option under Help and here above info.txt the menu point "correct Help" -> there must be the batch file C:\Wswin\WinHelp32\winhlp.cmd (normally installed with V2.98.5/6) -> administrator rights are necessary (at the request) -> If the correction was successful or not necessary, this menu item disappears or is not available. not at V2.98.5: - The Wetter-Display by Matthias Krücke (www.woldegk-wetter.de) also appears in the Start menu when the corresponding files being found. For this necessary: changed libSMBM.js (libSMBMframe.js or libSMBMblank.js) - who wants to use this possibility, the existing file libSMBM.js has to replaced with the file libSMBMframe/blank.js (libSMBMx.js -> libSMBM.js). libSMBMframe.js Wetter-Display is displayed in graphics frame libSMBMblank.js Wetter-Display will be displayed in new window or TAB. Anyone who has made any changes in his libSMBM.js should before backup this file! - VantagePro - new solar fault handling: if the solar value exceeds the max. possible solar value - e.g. Cooling error This value is corrected to MaxValue * 0.75. - moves older Debug- or CSV-Files from the Wswin-Folder to Debug- or Export-Folder (Subdirectories from Wswin) V2.98.4 2016-03-24 - Correction at Season-Period-Variables for example %ws_seasontxt_summer[yyyy]% ws_season_summer[yyyy]% this variables used until now UTC Times. With this there was a problem in year 2016 with summer start Now they use the Normal-Time - New variable: Thousand separator for one line on %thousandsep_on% - Changes for the TE923 Stations and Recording-Intervall-Detection (1440 minutes) V2.98.2 2016-03-03 - additional Information under Sun/Moon for Moon-Rise and -Set position - Variables for moon rise pos, moon set pos, sun rise pos, sun set pos V2.98.2 2016-02-29 - Bug at the Season-Variables and also current.html on 29.February (lap year) solved. - new Variables: Data saving for later using: %###% stands for 1...255 , (Per cent-signs necessary!) Begin data store data in file %calc_save_on%% ###% - > data in file calc%###%_%customfile% End of storing data in file %calc_save_off% Using the data formerly stored with calc_save_on or also from directly generated value-data file: Working variables off %calc_off%% ###% - > data from calc%###%_%customfile% Working variables on %calc_on% more and more detailed information about this control variables can you found in ws_variables_en.txt Moon position Azimut %ws_moonpos_az% Moon position Azimutabs %ws_moonpos_abs_az% Moon position Elevation %ws_moonpos_el% Moon pos Elev>0(night) %ws_moonpos_el_g0% Moon high elv position %ws_moonpos_high_el% - Consideration of automatic X-CSV- as well as CSV-Import, if air pressure is absolutely handed over, but must be stored relatively (is valid only for set weather-stations Vantage as well as TE923) - Solar-values of a Vantage after sunset are cut off (= Workaround for defective solar-sensor) by force on 0! V2.98.1 2015-09-17 - new variables Spring season meteol. %ws_seasontxt_springmeteo[yyyy]% Summer season meteol. %ws_seasontxt_summermeteo[yyyy]% Autumn season meteol. %ws_seasontxt_autumnmeteo[yyyy]% Winter season meteol. %ws_seasontxt_wintermeteo[yyyy]% Spring season meteol. %ws_season_springmeteo[yyyy]% Summer season meteol. %ws_season_summermeteo[yyyy]% Autumn season meteol. %ws_season_autumnmeteo[yyyy]% Winter season meteol. %ws_season_wintermeteo[yyyy]% - new variables covered on actual days in the year/month: Std.Rain DV year value %ws_rainSTDVx_year% Std.Rain Derivation value %ws_rainSTDVx% V2.98.0 2015-08-31 Test Version V2.98.0 2015-08-06 - Bug with the wind-directional-graphics solved - if one used this menu once, had afterwards all wind-directional-graphics the same content up to a restart of the program. - Provides a template for data sent to Weather Cloud (http://weathercloud.net) = www_template_weathercloud.txt. Anyone wishing to use these meteorological service, be required to register there, then he gets an ID and a password. These data are then under Internet, Adjustments, TAB "WWW" and the next available service or just the number 1 enter. Select your template here, activate the selection (eg, "1") and set the weather service "active". In addition, here the transmission interval is set to 10 minutes (minutes offset should be 0 or 1). The settings are then to take over with "Save". With 'Test' you can test the whole thing. If you have the debug option and the debug Bit 4 activates under File, Options, tab "Settings", the transmission is logged to the file ws_debug_www.txt. - The template is designed for future expansion of this service - can be turned off in the template with -> 9Version=1 (instead of 2) - Sends for VantageProPlus all available data / sensors - Takes into account all possible sensors and can be adjusted to specific weather stations. - When you import the VWS (Virtual Weather Station) DBASE.CSV file the new structure (additional sensors 4-10) is taken into account now. the sensors 4-7 are stored as ID13...ID16 and ID29...ID32 the sensors 8-10 are stored as ID10...ID12 and ID26...ID28 TWH is stored as ID9 TWHS is stored as ID8 with the sensors 8-10 and set weather station VantagePro at the humidity values the range correction must be deactivated (Are otherwise limited this data to 1-15). Also here, the program does not consider the humidity unit (%)! - covered on actual days in the year/month: Std.Rain DV year %ws_rainSTDVx_year% Std.Rain Derivation %ws_rainSTDVx% - Sensor available %ws_availabletyp[x~tt]=Yes~No% and Weatherstation tt: 10=WMx, 20=WS2000-PC, 21=Weather station receiver, 22=WS2500, 23=WS2500-PC typ is same 40=VantagePro, 50=TE923, 60 Climalogger If a station type not 10,20,21,22,23,40,50 or 60 selected, for example 00, then this variable is the same as %ws_availableX[x]=Yes~No% - > Weather station type is not considered. - Sensor Verfuegbar %ws_availabletyp[id~tt]=Ja~Nein% (id=-1..46) und Wetterstationstyp tt: 10=WMx, 20=WS2000-PC, 21=Wetterempfänger, 22=WS2500, 23=WS2500-PC ist identisch 40=VantagePro, 50=TE923, 60=Climalogger Wenn als Stationstyp nicht 10,20,21,22,23,40,50 oder 60 gewählt z.B. 00, ist diese Variable identisch mit %ws_availableX[x]=Ja~Nein% -> Wetterstationstyp wird nicht berücksichtigt. - Average Month/Year %season_monthmin[id~mm~bbbb~eeeeS]% -> with consideration of 0 values Average Month/Year %season_monthmax[id~mm~bbbb~eeeeS]% -> without consideration of 0 values For id = 34,37,39,40 (Rain, Sunshine time, Rain duration, ET) and Compare Typ S S=Month/Year-Sum-averages-value - Increasing the Mem variables from 64 to now 128 - Multiple addition with mem-Var %ws_calcmem[+]=memstart~memend~decimal places% memstart=1..127, memend=2..128 - Average value from mem-Variables %ws_calcmem[0]=memstart~memend~decimal places% memstart=1..127, memend=2..128 Come here in the series "invalid data" for example no number, so the program will ignore this Mem-variable . Mem Addition w1+w2 %ws_calcmem2[+]=mem1~mem2~decimal places% mem1=1..128, mem2=1..128 Mem Subtraktion w1-w2 %ws_calcmem2[-]=mem1~mem2~decimal places% mem1=1..128, mem2=1..128 Mem Multiplikat. w1*w2 %ws_calcmem2[*]=mem1~mem2~decimal places% mem1=1..128, mem2=1..128 Mem Division w1/w2 %ws_calcmem2[/]=mem1~mem2~decimal places% mem1=1..128, mem2=1..128 Mem 2 Average (w1+w2)/2 %ws_calcmem2[2]=mem1~mem2~decimal places% mem1=1..128, mem2=1..128 Note ! The calcmem2 variable always used only 2 Mem variables values The calcmem variable uses a set ( up ) of Mem variables - Day Array *%ws_xarraydxx[id~s~a~ddd]% id = -1..46 s = Separtor (for example " " "," ";") -> 1 Char! a = 0 ->Average a = 1 ->Minimum a = 2 ->Maximum a = 3 ->Date a = 4 ->Sum only valid for ID 34,37,38,39,40 a = 5 ->Min Time a = 6 ->Max Time a = 7 ->Average of the Average over Days a = 8 ->Minimum Average over Days a = 9 ->Maximum Average over Days ddd = 000->031 Days, 001...400 Days backwarts - Month Array *%ws_xarraymxx[id~s~a~dd]% id = -1..46 s = Separator (for example " " "," ";") -> 1 Char! a = 0 ->Average a = 1 ->Minimum a = 2 ->Maximum a = 3 ->Year_Month a = 4 ->Sum only valid for ID 34,37,38,39,40 a = 5 ->Min Date_Time a = 6 ->Max Date_Time a = 7 ->Average of the Average over Month a = 8 ->Minimum Average over Month a = 9 ->Maximum Average over Month dd = 0->12 Month, 1..36 Month backwarts - Array Calculation %wsx_calcarray[id~s~a~d~ARRAY]% id = -1..46 s = Separator (for example " " "," ";") -> 1 char! between the values a = 0 ->Average - with id36 (Wind direction) the dominating wind direction is reported a = 1 ->Minimum a = 2 ->Maximum d = decimal places ARRAY may be a corresponding array variable or even a separate entry invalid values in the array (for example "--") are ignored id is currently only evaluated for wind direction (36)! Start Program at Condition=1 %wswin_runprogram=Condition^C:\Path\Filename^Parameter% V2.97.14 %ws_ignore% -> Program is started when all customised files are worked off and condition is 1 Start Program at Condition=1 %wswin_runprogramx=Condition^C:\Path\Filename^Parameter% V2.97.14 %ws_ignore% -> if the current customised file is ready and condition is 1 Condition can and should be build with the variables (ws_compare) V2.97.13 20014-11-07 - Bug at the production of the History dates over Internet, tables/graphics solved. The function was introduced with the V2.97.11 and if one additional to the "History data" and for example Year-data file chosen, a folder 2015 was created with a data file his_y2015.gif. - Bug at data-logger-interval >= 30 minutes solved - Possibility, to turn off the creation of the ice- and frost-days (Weather station, Statistics data, TAB "Settings") After alteration, this window must be left with "OK + Close"! Variables: - Caution: if all month (12) should be shown, don't use a variable for the year! %winddirproz_NNE_mpast[01~0000]% %winddirproz_NNE_mpast[02~0000]% %winddirproz_NNE_mpast[03~0000]% %winddirproz_NNE_mpast[04~0000]% %winddirproz_NNE_mpast[05~0000]% %winddirproz_NNE_mpast[06~0000]% %winddirproz_NNE_mpast[07~0000]% %winddirproz_NNE_mpast[08~0000]% %winddirproz_NNE_mpast[09~0000]% %winddirproz_NNE_mpast[10~0000]% %winddirproz_NNE_mpast[11~0000]% %winddirproz_NNE_mpast[12~0000]% V2.97.13 %ws_ignore% - The Distribution-Wind-Direction Variable can now be use in a year template DistributionWD% N-NE %winddirproz_NNE% at month_only too and year template DistributionWD% NE %winddirproz_NE% at month_only too and year template and so on. - For id = 35,45,38,41,42 (Wind,Gust,Brightness,UV,Solarradiation) und Compare Typ X X=Monthly-day-max-value the Result is the minimum of all day-maxima for the choosen month over years! Compare month min %season_monthmin[id~mm~bbbb~eeeeX]% -> result only value Compare month min %season_monthminr[id~mm~bbbb~eeeeX]% -> result year month and value Compare month min %season_monthmind[id~mm~bbbb~eeeeX]% -> result date and value - %season_dayminmax and %season_dayminmaxd from V2.97.13 Season DayMinMaxValue *%season_dayminmax[id~ddmmyyyy~ddmmyyyy]% for ID=35,45,38,41,42 Season DayMinMaxVDate %season_dayminmaxd[id~ddmmyyyy~ddmmyyyy]% for ID=35,45,38,41,42 For Wind, Gust, Brightness, UV and Solarradiation is the minimal Max-value reported. - Standard Temp-Derivation Month %ws_STDV_yearmonth[mm~yyyy]% covered until current month V2.97.12 2014-08-27 - new Variables Season DayMinMaxValue *%season_dayminmax[id~ddmmyyyy~ddmmyyyy]% (of the min-values the maximum value) Season DayMinMaxValueDate %season_dayminmaxd[id~ddmmyyyy~ddmmyyyy]% Season DayMaxMinValue *%season_daymaxmin[id~ddmmyyyy~ddmmyyyy]% (of the max-values the minimum value) Season DayMaxMinValueDate %season_daymaxmind[id~ddmmyyyy~ddmmyyyy]% - If data will be available for at least one complete year for the main-outdoor-sensor, the data covered on the current day - minimal min-value - maximum min-value - average min-value - minimal Max-value - maximum Max-value - average Max-value now additionally displayed. Can be under Internet, Adjustments, Tab current.html disabled. - Season Period <= %season_idldaypx[id~ddmmyyyy~ddmmyyyy~vvvvvvN]% Season Period >= %season_idhdaypx[id~ddmmyyyy~ddmmyyyy~vvvvvvN]% Result (Example for %season_idhdaypx[0~01010000~31120000~0020,0A]%) 03.08.2003 14.08.2003 12 days - Season MaxSumValue *%season_maxs[id~ddmmyyyy~ddmmyyyy]% (id=34 Rain, id=40 ET) Season MaxSumDate %season_maxsdate[id~ddmmyyyy~ddmmyyyy]% (id=34 Rain, id=40 ET) show the day with the max value of the chosen period - Monthly-/Yearly-interpretation over years as well as the set time period: Condition: dd=32..35 = only same Months as well as Years are appraised dd=32=avg; dd=33=max; dd=34=min; dd=35=avg with current month/year # mm = 00=Year 01..12 Month For the end period (DDMMyyyy) the day as well as the month are ignored. With this Monthly- as well as Yearly-interpretation also is allowed: Season Ice days %season_icedays[32000000~00000000]% = yearly-average-interpretation here the average value is calculated with the data since data collecting begin until without current year Season Ice days %season_icedays[32010000~00000000]% = average of all Januaries here the average value is calculated with the data since data collecting begin until current year, if exactly the current month is January, this January is not taken into account! With dd=33 as well as dd=34 becomes in the variable% season_days% spent the corresponding year! With dd=32 as well as dd=35 becomes in the variable% season_days% spent the number of the taken into account years! With dd=32=avg and dd=34=min, it becomes the current year as well as the current month doesn't take into account! Otherwise if dd=01..31 the values for the pre-determined period - and yyyy=0000 for Start Year the current Year is used! All these variables involves: Season Ice days %season_icedays[ddmmyyyy~ddmmyyyy]% Season Frost days %season_colddays[ddmmyyyy~ddmmyyyy]% Season Cool days %season_cooldays[ddmmyyyy~ddmmyyyy]% Season Summer days %season_warmdays[ddmmyyyy~ddmmyyyy]% Season Hot days %season_hotdays[ddmmyyyy~ddmmyyyy]% Season days <= %season_uldays[ddmmyyyy~ddmmyyyy]% Season days >= %season_uhdays[ddmmyyyy~ddmmyyyy]% Season days User3 %season_u3days[ddmmyyyy~ddmmyyyy]% Season days User4 %season_u4days[ddmmyyyy~ddmmyyyy]% Season days User5 %season_u5days[ddmmyyyy~ddmmyyyy]% Season trop nights %season_tropndays[ddmmyyyy~ddmmyyyy]% Season frost grow days %season_frostgrowdays[ddmmyyyy~ddmmyyyy]% Season rain days %season_raindays[ddmmyyyy~ddmmyyyy]% Season Heatdegree days %season_heatddays[ddmmyyyy~ddmmyyyy]% Season Cooldegree days %season_coolddays[ddmmyyyy~ddmmyyyy]% Season Growdegree days %season_growddays[ddmmyyyy~ddmmyyyy]% Season XHeatdegree days %season_xheatddays[ddmmyyyy~ddmmyyyy]% - The variables always can be directly used under Weather, Weather Forecast and here in the rider "Season_var"! - Season rain days 2mm %season_rain2days[ddmmyyyy~DDMMyyyy]% Season rain days 5mm %season_rain5days[ddmmyyyy~DDMMyyyy]% Season rain days 10mm %season_rain10days[ddmmyyyy~DDMMyyyy]% Season rain days 20mm %season_rain20days[ddmmyyyy~DDMMyyyy]% Whereas the 2mm, 5mm, 10mm and 20mm are user defineable - so the program uses that values! So look at the variables %rain2value%,%rain5value%,%rain10value%,%rain20value% or Program-Help! V2.97.11 2014-07-10 - Adaptations to the indication for sun as well moon Eclipse - with the VantagePro and set average UV/Solar also at read out of the data from the DAVIS data logger now the averaged values for UV/Solar are used (earlier always the max-value!). - at new installation and weather station VantagePro now the default set is: use average for UV and Solar -> See weather station, Adjustments, Parameters "ø UV / solar" - The X-CSV interface now supports more time-/date-formats. Also now is a one-digit hour-values (format h:nn) and/or date-values (for example d.m.yyyy) allowed. Furthermore UTF8 and Unicode files are supported. ... one can also adopt the data of the HP1000wifi (CSV-Export-File) directly via the X_CSV-Interface. - at Wunderground, now all available Leaf-, Soilmoisture, Soiltemperature-Sensors and max. 5 Outdoor-Temperature Sensors (with a VantagePro only 4!) reported Max. 5 Aussen-Temperatursensoren (VantagePro Max). 4, reported (until now only the first sensor of it was reported!) - for Wetterarchiv.de a new server is used. - for reporting to Wetterarchiv.de now times from 5 minutes on are supported. - now you can set a time-period for the e-mail sending from WSWIN - Under the Menu Internet, Update graphics/tables ... also the historical dates can be updated -> it is used the there set years for it -> for the long-time-graphics the settings under Internet, Adjustments, Graphics2 (Begin year) - Specifically for the XBP-Datenlogger (VantagePro/VUE), a function was build in, so that no more data records are lost when reading out the data logger. V2.97.10 2013-11-28 - Option to don't show the bottom axis at History Longtime Temperature graphics. -> click on the axis = off/on Sorry I have at the moment no other solution for this issue. V2.97.9 2013-11-19 - New variable:%ws_arrayx[id~xx]% id=-1...46, xx=01-99 - Small things - Correction at Longtime Temperature Graphic V2.97.8 2013-09-06 - New color settings at the graphics linies for Growing temperature, Frost-Sum and Thermal-Sum - finds the program graphics for Growing temperature, Frost-Sum and Thermal-Sum and a last-year comparison, the graphics is also shown in the menue. - New varialbes for Days comparison over years Season DayMinValue *%season_daymin[id~ddmmyyyy~ddmmyyyy]% Season DayMinValueDate %season_daymind[id~ddmmyyyy~ddmmyyyy]% Season DayMaxValue *%season_daymax[id~ddmmyyyy~ddmmyyyy]% Season DayMaxValueDate %season_daymaxd[id~ddmmyyyy~ddmmyyyy]% Season DayAvgMinValue *%season_dayavgmin[id~ddmmyyyy~ddmmyyyy]% Season DayAvgMinDate %season_dayavgmind[id~ddmmyyyy~ddmmyyyy]% Season DayAvgMaxValue *%season_dayavgmax[id~ddmmyyyy~ddmmyyyy]% Season DayAvgMaxDate %season_dayavgmaxd[id~ddmmyyyy~ddmmyyyy]% For begin date and yyyy=0000 uses the program the settings for - sensor available since - or - recording begin - or - the year 1980 (if there is no other setting!) This variables can also be checked under Weather, Weather forecast - and here under "Season_Var" V2.97.7 2013-06-10 - Bug at PDF-Creating for "Statistic dates" solved V2.97.6 2013-06-06 - new variables Month name variable %monthtxt[x]% x=-12..0..12 0:current month, -12..-1:relativ to current month Result: January, February, March, April, ... Short month name var %monthtxts[x]% x=-12..0..12 0:current month, -12..-1:relativ to current month Result: Jan, Feb, Mar, Apr, ... Day name variable %daytxt[x]% x=-7..0..7 0:current day, -7..-1:relativ to current day Result: 1=Monday, 2=Tuesday, 3=Wednesday ... Short day name var %daytxts[x]% x=-7..0..7 0:current day, -7..-1:relativ to current day Result: 1=Mo, 2=Tu, 3=We ... V2.97.5 2013-05-05 - Changes at the Month-Season-Variables - sees also ws_variables_en.txt and V2.97.5 Compare M/Y min %season_monthminr[id~mm~bbbb~eeeeN]% -> Result Year Month and Value Compare M/Y max %season_monthmaxr[id~mm~bbbb~eeeeN]% -> Result Year Month and Value mm: Month 01..12 must be at least two-digit, 00=year, 99=current month, 99=all months is for mm=98 used, all months of the period are take into account Examples: = Current Month=5 %season_monthmaxr[34~98~0000~0000A]% -> 2002 08 331,98 mm %season_monthmaxr[34~99~0000~0000A]% -> 2006 05 186,80 mm %season_monthmaxr[34~00~0000~0000A]% -> 2002 00 1616,28 mm %season_monthmaxr[34~01~0000~0000A]% -> 2007 01 202,00 mm V2.97.4 2013-04-11 - Changes at degree days (graphics) V2.97.3 2013-04-06 - Changes at graphics for the Long-Time-Graphics - Possibility, to pretend one start-year for the long-time-graphics and automatic Update -> The yearly-specification takes place under Internet, Adjustments, Graphics2. Only at the automatic production or if one executes "Store statistics dates" under Statistic these set years are taken into account. V2.97.2 2013-04-03 - Changes at graphics for the Long-Time-Graphics (Growing-Temperatur and frost-sum). V2.97.1 2013-04-02 - Corrections at graphics for the Long-Time-Graphics. V2.97.0 2013-03-30 - smaller transfer interval for Wetterarchiv.de - Support API2 (= additionally transfer of month-/yearly-data) to AWEKAS! - Month-Season-Variables - sees also ws_variables_en.txt and V2.97.0 Compare month/year min %season_monthmin[id~mm~bbbb~eeeeN]% -> Result only value Compare m/y Max %season_monthmax[id~mm~bbbb~eeeeN]% -> Result only value Year of the comparison %season_year% - > query in new line Compare m/y min %season_monthminr[id~mm~bbbb~eeeeN]% - > result year and value Compare m/y Max %season_monthmaxr[id~mm~bbbb~eeeeN]% - > result year and value Year of the comparison %season_yearr% > in same line, like variable - doesn't work with _mpast! Compare m/y min %season_monthmind[id~mm~bbbb~eeeeN]% - > result date and value Compare m/y Max %season_monthmaxd[id~mm~bbbb~eeeeN]% - > result date and value - new STDV-Variables - sees also ws_variables_en.txt and V2.97.0 temp deviation year/month %Ws_STDV_year[mm~yyyy]% covered on year / month rain of deviating y/m %ws_rainstdv_year[mm~yyyy]% rain of deviating y/m %ws_rainSTDV_year_proz [mm~yyyy]% sun time deviating y/m %ws_sunSTDV_year [mm~yyyy]% sun time deviating y/m %ws_sunSTDV_year_proz [mm~yyyy]% - With the season variables now are also for the final period -9..-1,00 for day, 00 for month 0000 for year possibly -> the program then subtracts the day-number and/or uses the current value with 0 (day, month, year) - further alterations of variables - sees ws_variables_en.txt and V2.97.0 - Adaptations to graphics for growing-temperature, frost-sum, thermal-sum - Possibility, to show the entire time period (also without data) at the mini-graphics - Mini-display: Indication of the wind-direction also without degree-statement - Manually entered long-time-data (temperature, rain, sunshine-time ...) being able to be taken over into the yearly-data file and so available for the long-time-graphics. - New long-time-graphics (Show yearly-data)): Temperature, precipitation, sunshine, warm days, cool days, growing-temperature, frost-sum, thermal-sum. If these graphics exist, they are bound into the start-menu (start.html). - Possibility to let updated the History-graphics daily. - Possibility to export the monthly-data file 1x daily automatically -> File, Options, TAB Parameters - When exporting and available "pseudo"-solar-values also a solar-value (id42) is written in the export-data file. So these data are available at station-change to a VantageProPlus. Whether these data depends of the reality in accordance with the done settings of the users -> an evaluation of these data is not done! V2.96.10 2012-01-07 - bug solved: at graphic creation und not existing folder, certain graphics were not generated - Current day-value for grassland-temperature etc. is excluded extra in the sum-statement - additional adjustment-pixel for the graphics-width V2.96.9 2011-12-30 - Changes at frost sum and presentation in November/December - only relevant for northern hemisphere -> the data of the affiliated year now are shown and no more of the current year with the variable %icesum_mpast[mm~yyyy]% the corresponding monthly value now is passed out with mm = 00 = year the annual value (sum months November until March) - X-CSV: Data files only with one single line (= data) now are taken into account. - new variable fill with blanks %ws_fillstr=total_number~Text% V2.96.8 2011-10-06 - Bug since V2.96.7 at the stations with brightness-sensors (old ELV-stations) solved: Brightness-values (lux) were after exporting and re-importing of the EXP*.CSV data file wrong and with this also the Sunshine-time wrong - new variables: Season days <= %season_idldaysx[id~ddmmyyyy~ddmmyyyy~vvvvvvN]% Season days >= %season_idhdaysx[id~ddmmyyyy~ddmmyyyy~vvvvvvN]% With season_idhdaysx or. season_idldaysx the set units are used! and the compare value vvvvvv must always have 6 signs (for example. 000002; 0003,5; -001,5 ) !!! days User5 x-month/year %u5days_mpast[mm~yyyy]% Season days User5 %season_u5days[ddmmyyyy~ddmmyyyy]% Limit value U5 %ws_u5daysvalue% Text U5 %ws_u5daystext% Days Month U5 %ws_u5days_m% Days Year U5 %ws_u5days_y% For the using of Extra5, the settings must be done there and after it the update of the yearly-data file must be done. - Bind the graphics solar energy, thermal-sum, growing-temperature, frost-sum into the "menu", provided these yearly-graphics are available/created. V2.96.7 2011-07-01 - Support the transformation of brightness-values (lux) with XCSV-Import and general import over the ID=138 to solar-radiation (W/m²). Settings for limiting value and alternative calculation for it is under Weather station, Special sensors - TAB "#3" at WS2500 / XCSV. - "wswin_x-csv_wh3080.cfg" for the Fine offset Electronics Co. WH3080 Weather station Remark about the WH3080: this station shows too high UV-values - you can use the factor 0.65, so that you get realistic values for example 14 UV-I shown, actually 14*0.65 = 9.1 UV-I V2.96.6 2011-06-18 - Bug with wind direction name "NWN" - should be "NNW" solved. - corrected Winddir graphics names "n.gif,nne.gif, ne.gif,ene.gif ..." (since V2.96.5) Consider! the variables "%windd_gra%, %winddrange_gra%, %windgd_gra%" are concerned also at it! Furthermore, these renamed graphics-data files must be transferred on your Web-page! V2.96.5 2011-06-12 - Adaptations for DAVIS Envoy8x for XCSV-Import Now the wind-directional-data 'N, NNE,NE...' are also supported - necessarily for this is set Unit=2 and the ReceivedPackets for the calculation of the reception - additionally in the XCSV-config-area the Data-logger-interval must be set. You get a example "wswin_x-csv_envoy8x.cfg" and "wswin_x-csv_Envoy8x.csv" (for this data structure is the XCSV-Datei included: 1xISS, 1xTemperature-station, 1xDavisVUE, 1xLeafStation, 1xMoistureStation) So it should be possibly to produce an independent XCSV-Config-File for yourself! With utilization of the Envoy8x, it gives up the restriction of the solution with the temperature-addition-sensors ~ 0,55°C (= 1°F)! As well, the wind-speed-values of a VUE don't have the solution-restriction of 1mph (~ 1.6 km/h) But not valid for VantagePro-ISS - here no higher solution is possibly (system-induced). - For the TFA Data-loggers and KlimaLogg...Pro now is calculated the dew point-values automatically and is grasped - with it the possibility is to get all such functions, as for a solid sensor (for example alarm-values). To get these data for older data before V2.96.5 (valid only for climate-loggers as well as KlimaLogg pro): under File, Exporting..., Export all month files, Data Files, The exported data files are stored under..\AllData - after this delete/rename the monthly-data - then under File, Import weather data, choose "CSV-Text file (Excel)" and the Option ".\AllData - >????-???? - the data are again imported. Caution! your weather-station-setting must be able to grasp the temperature-sensors ID10..ID16 - only with VantagePro, WS2xxx or weather-sensor. (not WMR!) - under Weather, Degree Days +... adaptations were performed with graphics. -> so, it is also possibly to make comparisons with other years. V2.96.4 2011-04-25 - If a value for wind-temperature (TE923) is contained with the export, this is reused with import (until now, the wind-temperature was calculated again!) - Possibility of the display of "time date" to rearrange to "date time". Option under Internet, Adjustments and here TAB Common - Calculate solar-energy with a VantagePro and available solar-sensor (and only with it!) - with corresponding variables to it -->the year file must be updated! - Possibility to show the solar-energy as graphics under "Statistics dates" - with the season variables the relative values from, -901... -9xx, introduced -> if the chosen season period has not yet begun, the program declines another year with it for example look at ws_variables.txt - The single-graphics (yesterday, week, month) now become also for minigraphics (mini_? as well as mmini_?) generate -> if chosen - Possibility, to represent the process of the growing-temperature in a diagram and as graphics to save - PWS weather is now supported with an included Template "www_template_pws.txt." but the support of PWS weather didn't answer at email questions! - Possibility to send older as well as ancient hour-data to Wunderground (-> Update tables/graphics ...) - Alterations for sending data to Wunderground: now for sending always http://weatherstation.wunderground.com is used -> no more modifiable. To look at the data, one can still inputs an independent URL (example http://deutsch.wunderground.com). Default is: http://www.wunderground.com - if one uses the start-parameter /WG (for Wunderground), older hour-data for max. 24 hours are send to Wunderground at program start (if the computer was powerd off). - Possibility the chosen unit format (example °F, m/s etc..) and choosing months (or all data) to store in one single-export-data file. Selection: "Date: 1 file" under File, Exporting..., Export weather data This generated export-data file lets itself import again only with a independent X-CSV_Import-configuration! The file name is formed from the chosen year and month. - supports the "KLIMALOGG...pro" from the firm TFA via File Watching the watching data file lies normally here: %APPDATA%\KlimaLoggPro\0_history.dat or dissolved C:\Documents and Settings\%USERNAME%\Appdata\KlimaLoggPro\0_history.dat V2.96.3 2011-01-01 - problem mit week files or last week in year solved (was created as w2009_52.*) V2.96.2 2010-12-25 Caution! Under Windows7 as well as Vista admits the program no more that it is started under% ProgramFiles%\%Installationpath% For example C:\Program Files\Wswin or C:\Progra Files (x86)\Wswin ! - Changes at WWW-Templates - now max. 50 possible - if monthly-data should be transferred with it, the first Template must for this used, further Template are possible - as soon as the program meets an inactive entry, it finishes the check wether further WWW-Templates should be worked off! The first 3 Templates cannot be switched inactive - Improved X-CSV-Import function (for example day, month, year as single-value are allowed) furthermore the program now tolerates also values with units, if the option "PreChar" is set. - With using of X-CSV and File-Watching, also UTC-times/Unix-time-format are now allowed. - Bug at email-send and text only in subject solved - new variables (for example Output for spring period ) - new season-variables for longest frost duration %season_frostduration[ddmmyyyy~ddmmyyyy]% and longest dryness duration %season_drynessduration[ddmmyyyy~ddmmyyyy]% -> to the utilization, it is absolutely necessary that the yearly-data file(s) is updated! -> these variables also available directly in the program under Weathers, Weather forecast and here in - Alterations, if only 1 data records exist for a day. The program now takes this into account! However, with only one value for day no meaningful min-/max-day-interpretation is possibly. If is set, that for the day-average calculation are 4 values (7, 14, 2x21) is used, the Data record must have a time >= 07:30. If the time lie before this point, the data record is not recognized! With the setting "all data" for average-value uses, this restriction is not valid. V2.96.1 2010-08-11 - Altered GIF-graphics-delay time now are not put back again to default 500ms after program-start! - Alterations at the instruments-graphics-generatrion - bigger area for solar-monthly-factors (now 0.2 to 0.7) because of altitutes-height in higher location. - new variable %makewind_txtlong[v]% (mainly for speaking!) - new value "ApparentTemperature" (Australian alternative to Windchill) as variable %apparenttemp% and under Weather, Weather Calculator in the TAB "Windchill" V2.96.0 2010-06-26 - Alteration of the %ws_season_xxxxx[yyyy]% variables: If for year 0000 is used, the program uses the current year, besides this time period has not yet begun, then the program declines one year - the offset-time introduced with V2.95.11 for the aktuell.gif-files now can be individual set in a range from 0...2000 ms, 0=off = as before V2.95.11, 500=default) -> Internet, Adjustments, Graphics - at automatic export of the ws_export.csv all relevant data (as well as activated sensors) now become written into this export file. therefore also the weather forecasts coming from the stations are here written. Possibly, for that reason, it is necessary to rename/backup a current ws_export.csv-file. - With CSV-Import, one now can also directly import the "ws_newdata.csv" (if it contains only the indexes and not the other header lines). Renames to EXPmm_YY.CSV (mm=month of the 1. Data record, YY=Year of the 1. Data record) - Possibility of exporting all monthly-data files in only "one" EXPmm_jj.CSV file,. -> File, Exporting, Export Weather data and here selects at Measure items then: "Export all month files: 1 File" --> so that easier shifts with sensor-exchange in that one must alter only the indexes! - The program checks at program-start (and under Help, Info about...) wether a new program-version is available -> Update check can be disabled: File, Options - Adaptations at tables because of the bigger "ScrollBars" under Windows 7 - Possibility, to not transfer the wind-direction to internet-services! -> Weather, Weather condition, Tab "Values 1" - Possibility, to send e-mails per weekday and/or monthly-day - With gradient displaying there is the need to set also "Color reducement in GIF picture". If this isn't set the program corrects this at program start. -> so in Windows7 such graphics (with gradient) should be correct created now. - new variable: Unix32Date/Time %ws_unix32datetime% - new season variables: with customised compare values!! %season_raindaysx[ddmmyyyy~ddmmyyyy~vvvvv]%, %season_growddaysx[ddmmyyyy~ddmmyyyy~vvvvv]% %season_uldaysx[ddmmyyyy~ddmmyyyy~vvvvvN]% days <= vvvvv %season_uhdaysx[ddmmyyyy~ddmmyyyy~vvvvvN]% days >= vvvvv (N=CompareTyp A:Day-Average-Value, L:Day-Min-Value; H:Day-Max-Value) - with TE923 (with OEM-Stationen) now the possibility, to read out the data-logger-content and to analyze. - with FileWatching and CSV- or X-CSV-data files possibility, to let finished the program after importing the data. V2.95.11 2010-02-16 - Bug with NearRealTime solved - settings wasn't taken over - new variables: see ws_variables_en.txt and V2.95.11 ( example: %ws_season_spring [yyyy]% ) - Offset-time for aktuell.gif-file(s) - Bug in producing of the ws_newdata.csv and wind gust solved (involves only VantagePro) ->last value was registered at calm further. V2.95.10 2010-01-08 - Expansion of the wedaal.txt with month and yearly-data - If the time-sensor was chosen for rain-time, these data are shown at single-sensor-view as well - for the settings Vantage and TE923 now passes the possibility for each settings-rider to produce a Hardcopy with the program (double-clicks). - for most options, which start a program, there is now the possibility over a "test-button" of executing to check the chosen program. V2.95.9 2010-01-04 - bug at status weather-station Vantage and outdoor temperature ISS under -17,7°C in day, month, and annual values solved - Support of the WS2800 (via data File-Watching). - a few new variables. V2.95.8 2010-01-01 - Bug at creating week files solved: for CW53 in new year the files for CW1 in old year was created! - Bug at Year-Sum in Statistic Data for sunshine time and rain time solved. - Reset Longtime Values: - Possibility to reset all longtime values (for complete new calculation) - a double-click on the sensor-names resets only the values for this sensor - for longest Duration Dryness and Duration Frost double-clicks on "from" - for "Max. Air pressure tendency" this is not intended not (only over Reset) Caution! -> the values for "Max Air pressure tendency" and "max. Rain/h" can be grasped only correctly in the online-operation! - if one Resets the values for "longest Duration frost", the current last forst values are also reseted under Weather, Weather forecast, Statistics dates - last frost. The long-time "longest Frost Duration" is only determined if no frost prevails during acquisition!!!! V2.95.7 2009-12-28 - bug "deselection of "Import/Merge not possible" at Time-Sensor setting solved - allows at X-CSV-Import also UTC-date/time - allows at X-CSV-Import also the Unix-date/time-format (seconds since 1970/01/01 00:00:00) -> formattype must be Date+Time choosen and the formatstring must be "zzzzzzzzzz" entered additional is here "UTC" to choose (normally)! - the variables %season_maxdt[id~ddmmyyyy~ddmmyyyy]% and %season_mindt[id~ddmmyyyy~ddmmyyyy]% was reactivated -> show time and date simultaneously V2.95.6 2009-12-20 - Restrict the max. solar-radiation of 1750 W/m² (former 1800)) - Only values for solar-radiation are automatical taken over until 1700 W/m² for the longtime values! - Backup-longtime values are only taken over, if between the values is 1 day - mini-graphics for gust winddirection can and is only generated for a Vantage-Station. V2.95.5 2009-12-08 - bug at time data (rain duration) at month and year solved - new variable: %season_tropndays[ddmmyyyy~ddmmyyyy]% V2.95.4 2009-11-21/23 - corrected a problem at Time View and paging forward - new variables: %avgmin_mpast[id~mm~yyyy]%, %avgmindate_mpast[id~mm~yyyy]%, %avgmax_mpast[id~mm~yyyy]%, %avgmaxdate_mpast[id~mm~yyyy]% - variable read commend %varstore_readc[xxx]% wasn't documented (content is untouched) read commend file %varstore_readr[xxx]% was lost - replaces ^ through % for using of this varialbe V2.95.3 2009-11-10 - Now proposes for 64-bit operating systems also C:\Wswin as installation folder - At chosen utf-8 encoding in the Min./Max.-table for ° (degree) the utf-8 encoding wasn't used. - Correct in History data the rain showing (for no data) V2.95.2 2009-10-31 - bug with template "template_season.txt" solved -> further% openfile=xxx% was ignored (= only master file was worked off) V2.95.1 2009-10-24 - Shift to new year-data file-format! When first starting of the V2.95.1, the program generates these new data format. If the program "hangs" on that generating, is the corresponding monthly-data file defective and must fore the further utilization berepaired (- > monthly-data file exports, corrects, imports). The older yearly-data files remain gotten, is necessary for version before 2.95.1) - Adaptations to VantageVUE: - the used Windcup-Typ is now correctly recognized and set - the possible values (in accordance with the supported sensors) are only appraised. In the V2.95.0, all values were appraised - with what these values for the not possible sensors was wrong (f.e. SoilMoisture, Leaf...) - Is for charset "utf-8" chosen, Wswin generates the own Html-Dateien in accordance with this encoding! = Adaptation of the umlauts etc.. at this format - Support of 2 further user-defined interpretations - > Weathers, Statistics dates, Extra (with variables and season-variables - for current values Updating of Year-Date files necessary! The table with values is only shown, if a sensor was selected for it. - determine Thermal Sum - sees to it under Weather, Degree-days +... - the taken into account months are yellow deposited. - even further new variables, sees also ws_variables_en.txt marked with V2.95.1): replace with UTF-8 code %ws_replaceforutf8 [the ° ^ Ä is äöüß only one tests]% Text-comparison = / < >% ws_comparestrx=text1~text2~text3~text4% If text1 = text2 then result = text3 If text1 <> text2 then result = text4 - new Template: template_season.txt control/activate under Control, Parameters Template/APRS/Synop/Metar/NearRealTime and there TAB Template If as well as long as this Template is worked off, other internet-data files (also Templates) becomes put back. Possible start-times from 00:05 to 23:49 V2.95.0 2009-09-26 - Supports the Weather Station DAVIS VantageVUE - solved bug at investigation tropics-nights. - Adjustments for sun-time as well as. Rain-time for the week-values on Monday. - for %avg10minwind%, %avg10minwindg%, %avg1minwind%, %avg2minwind% now you can use alternative units (m/s, BFT, Knts ...) - new variable Value to Time %ws_valtotime[h,hh]% - Beispiel %ws_valtotime[%sunmonth_d%]% -> 158:35 - Alteration of the indication for windrun - only in the monthly-statistics-graphics becomes the wind-run-value through 24 devided. - values before 1980 (exactly from 1.1.1938) is represented again. Is absolutely necessary, that under View, Adjustments the option 'not active: available from" is set! Without this option no data are generally represented before 1.1.1980! Without this option - the set limiting values for Leaf and Moisture (VantagePro) now are taken into account. - Data for UV, sunshine-time now are also at manual send to AWEKAS. - Times (sunshine-, rain-duration-time) now are passed out mostly in the time-format hhh:mm - in the history-graphics, also the unit (°C or km/24) is presented in the legend - in the wind-distribution / wind force graphics the reference (hour, day, month) is presented - rarely used menus has be been transferred in the Adjustments menu (through it less resources necessary) V2.94.3 2009-03-31 - Correction for choosen Weatherstation (Mebus,Irox,Honeywell,Cresta ...) and using of a modified temperature-/hum sensor: for month and year the sunshine time wasn't calculated, here expected the program a difference calculation - Expansion variable: %curminmaxhour [a,h,x]% new a: 6=difference at the prior time (exact hour) as well as sum with times, rain. - bug at season-variable and ID 37 or ID 39 (times) solved: shows hours vlues, but units minutes - Expansion of wswin_x-csv_import: If more data defined as then occur, this takes the program into account. With sunshine-time and data-delimiters ";" and numeric character-grouping the program take into account this V2.94.2 2009-03-24 - Correction at the %ws_calc-variables: %AllwaysSepPoint_on% is taken into account V2.94.1 2009-03-20 Caution! Only use the new WsWinAprs V1.4.1!!! and the calculation-method in the program was rearranged, for that reason it is absolutely necessary to update all yearly-data files (Internet, Update graphics/tables ...). A comparison with older Wswin-versions only is given through it conditionally! - The program now carries out an updating by force of the weeks/month/annual values, if it is not done via Update Internet-data files (for example). - Calculats tropics-nights - Allows alternative calculation of the average day-solar-radiation (Settings for this under View, Adjustments) - After alteration, update all yearly-data files (Internet, Update graphics/tables ...) - Enables the calculation of the difference of two sensors (same type) - Bug solved from V2.93.19 in the context settings as weather-station "VantagePro" and data is put over CSV-File. Here the program ignored data (modified Temp/Hum sensor), which are used for sunshine time. - Bug solved with the difference-temperature (for sunshine-time) and temperature-units in °F. - Bug solved with WMR9xx-Stationen and calculation of the windrun: under certain circumstances, the windrun wasn't determined right. - transfers to Wunderground also data of additional sensors (for example UV, solar-radiation, Moisture), if yours station has these sensors. - new variable %ws_array60min[xx]% - > for example for Clientrawhour.txt - new variable-type %season_... for example %season_avg[2~21122007~20032008]% - %season_avg[id~ddmmyyyy~ddmmyyyy]% One can determines/report values (or time/date) for a before-admitting time limit: here 2007-12-21 to 2008-03-20. - new variables To store in data file %varstore_write[xxx~text]% Readings from data file %varstore_read[xxx]% Commentary about the Var xxx %varstore_writer[xxx~remark]% - the variables %season_... and %varstore_ can you directly create and write in the program under Weather, Weather forecast and here in the TAB "Statistics data" and "Text" ... Recommendation: Generate the values in the program directly - new variable replace for Html-Code %ws_replaceforhtml[das ° ^ Ä ist nur ein test äöüß]% Result: das ° ^ Ä ist nur ein test äöüß - Variables general: The program treats the variables: Unit_on / Unit_Off and AlwaysSepPoint no more global. Default = Unit_on and AlwaysSepPoint=Off (settings of the Windows-system are taken over here) You must take care of that these settings for - customised Data files - Templates - customised report - customised speach output - NearRealTime is placed explicitly. - for the VantagePro, the setting for Unit was free-switched -> Weather station, Adjustments, Console - this changes are only taken over after complete power off Console/Envoy. -> For users, who want to rearrange the US-Units at the Envoy (at the Console you can do that direct). - Possibility of the import of each arbitrary text-based data file under utilization of a corresponding configuration-data file "wswin_x-csv*.cfg" here the File-Watching (also with Pause operation) is also supported, in this case the configuration-data file must be wswin_x-csv_import.cfg. Recommendation: set as weather station VantagePro and disable not available sensors. - if variables with the ID=45 (wind gust) are used for stations without wind gust, the program favors ID=35 automatically here -> Wind speed. - allow now the automatic creation of a 2. Sets (size) of mini-graphics (= #2). - Expansion of the WWW-Template - Interface - sees www_template_example.txt - among other things the program shows the Portal name in the program - Possibility, to send monthly-data also over this interface - Canges at Instruments view: now Computer with a screen-view of 1024x600 (Netbooks) can the Wind-instruments correctly generate. - at the Min./Max.-History Showing (and graphics for example minmax2009_2.gif) the STDV reference is displayed (if one has it deposited accordingly) - At Import/File-Watching and weather station TE923 (Nexus,Irox,Cresta etc.) and transfer of the Original-Wind chill-value from these stations as ID7, Wswin can determine the sunshine-term with help of the difference-temperature-formation. - for the x-csv-Import, following ready configuration is made available: wswin_x-csv_wh1080.cfg, for the WH-1080, WH-8681, WX-2008, Elecsa 6975, 265 NE, stations, with what here noticing is, that the EasyWeather software (6.1) has often a problem. Watches the EasyWeather.dat (or others) wswin_x-csv_tfa-nexus.cfg - for the TFA Nexus/Sinus stations. Need to convert the NexusOrg.dbf (dbase) in Excel and store it as CSV-File, in Excel use the user-defined format for the date/time-field "DATE_TIME" -> "dd.mm.yyyy hh:mm"! wswin_x-csv_elv_ws550.cfg - for the ELV/Conrad station WS500,WS550, WS888. So that the sunshine-time is taken over, in Wswin (under Weather station, Special sensors, #3) Import/Merge must be chosen. Before export in WeatherProfessional in the Windows "Region- and Language Settings" (System-control)) for numeric character-grouping here without the "symbol of numeric character-grouping" must be chosen, otherwise the sunshine-times 234.201 (for example) are not right acquired. wswin_x-csv_hygrosens.cfg - for Hygrosens data-loggers - is it considered only 2 by the 20 practicable temperature-sensor here. If you have more sensors, please adjust the configuration-data-file. V2.93.19 2008-04-08 - allows for email-subject variables - adaption at the WMR-9x8 and modified solar sensor - at import and CSV-File-Watching now also always the German date-format (dd.mm.jjjj) is allowed normally, WsWin uses the date-format settings of the Windows-OS! - now manual times for rain and/or sunshine-time (for example CSV-File-Watching or or Merging) supported. The program then calculates these times no more and uses these data. Settings for this under Weather Station, Special-sensors, #3 - on = Import/Merging allowed Sensor-ID's between 19 and 32. - the CSV-File-Watching interface (as well as merging and importing CSV-files) was extented. For rain, ET, sunshine-time, rain time also continuous values are handled, the program then calculate the necessary difference automatically: necessary ID's for this are 134 rains 140 ET as well as Hail 137 sunshine-time as well as. hail-time (additional the utilization of the manual time calculation is necessary here) 139 rain-time, (additional the utilization of the manual time calculation is necessary here) It is the times to be handed over (smallest value = 1 minutes, topmost value = 60 minutes) as minute-number! Allowed also the weather forecast-numbers (ID's 97,98,99) and for the VantagePro the windgust direction section as ID=96 with the values 0..16 (= N, NE..) - supports for wedaal.txt now the newer format for wetterboard-de. - adaptions for APRS (CWOP) - the program pretends the desired Send-Offset automatically - Acquisition of the frost-sum: see under Weather, Statistics dates or under weathers, degree days + ... -> for former years, it is necessary to update the "Year-File" with all availalbe dates turning off of the "ReadOnly" flag for updating is here not necessary! - as maximum wind-speed, now 250 km/h are possible V2.93.17 2007-06-21 - The viewing of the wind-distribution-graphics wind-direction/wind-speed now is possible - only intended for day view! V2.93.16 2007-06-18 - Bug at Windrose (introduced with V2.93.15) solved -> only 3 wind-directional-names were presented. - New wind-distribution-graphics wind-direction/wind-speed: the time-times are represented color-like in accordance with the legend with the peculiarities the last value, it is always passed out in "RED" and in recording mode the last 5 values are represented in "VIOLET" . For the last value, the wind-speed is shown in the legend (red). Graphics-name of it is ddis_f_?????.gif V2.93.15 2007-06-07 - new variables: %ws_uvtext% -> none, minimal, low, moderate, high, veryhigh 2 average (w1+w2)/2 %ws_calc[2]=12,0~15,1~3% Changes at %valuechange[x]=mm% for Rain, ET, Sunshinetime and Time Time sensor: now Result is the difference - Possibility to clasp the min/max values as last-reach -> see view menu, adjustments: option "min./max.value = alternate calculation ->last" - Possibility, to start a program/batch file during the recording and after working off internet files, -> see File, Options: Tab "timing controlling" and here recording - for sending data automatically to Wetterarchiv.de: after month change the monthly-data now become automatic transfered. - Possibility, to send data to 3 additional weather-portals over data file-generation or http-post. or, to use this function as 3 additional customised file creation -> see Internet, Adjustments: TAB "WWW" and information in data file "www_template_example.txt" - Additional safeguarding for TE923 (Irox, Mebus, Honeywell) against wrong time-/date-values - Bug resolved at producing of the 3 additionally possible current-graphics -> reserved storage was released no more. V2.93.14 2007-05-07 - Bug at TE923 (Irox,Mebus...) and hardware-version 4 and setting the time-zone local/used solved: Longitude-degree greater 100 was not taken on. - new parameters "Brightness in lux, sunshine-time, soil-temperature, rain rate" for AWEKAS and Direct - Link (only automatic sending) - new option "Charset" for Html - sides creation, under Internet, Adjustments, HTML) V2.93.13 2007-04-22 - Alteration of TE923 (Mebus, Irox, Honeywell) because of wind speeds >200 km/h - Correction from Czech language: the same graphics-name was used for air pressure and rain. V2.93.12 2007-04-02 - Alteration of TE923 (Mebus, Irox, Honeywell) because of wind speeds of 195,6 km/h - 122.1 mph V2.93.11 2007-03-18 - consider now also VantagePro 1 and updated firmware (daylight saving time) of the 20.Nov. 2006 - considers now at the VantagePro 2 the new firmware version counting at this time V1.60: WirelessConsole Dec 1 2006, WirelessEnvoy Dec 12 2006, CabelConsole Jan 7 2007 - consider the max. daily wind gust at the Irox/Mebus during the recording Attention! If the max. daily wind gust didn' happen during the recording (Data logger operation), the program can't assign that, because of missing time stamp and that becomes not considered. - with available grow sensor the first/last frost is investigated - as variables too To the follow of these data, the "year-file" must be updated!! V2.93.10 2007-03-05 - now at max wind gust the correct wind direction is assigned at all stations. - With the Irox / Mebux (TE923), also the UV-value now is represented in the weather-overview (current.html), provided chosen - Degree-days: also the growing-temperature now determines - if is reached the 200 value here, it begins Vegetation: the ground picks up nitrogen again, agricultural works can be begun. To the follow of these data, the "year-file" must be updated!! V2.93.9 2007-02-26 - Adaptations at VantagePro and crazy-playing solar-sensor - Possibility at statistics data and long-time values to go back to the prior value (backup): double-clicks on the unit name of the relevant sensor (after that with OK+Close takes over) - further adaptation for support WDLive (variables) - Small things... V2.93.8 2007-01-15 - new version of WsWinAprs - because of changeover of the APRS-Server - direct sending of Aprs-Daten (without entry at time-control) - please control your settings: The program puts automatically from time-control on directly control (under Control, Parameters Template/Aprs/Synop). - Adaptations to Synop in cooperation with Andreas Neuen - thank you to it among other thing sending email all 10, 30 or 60 minutes. - Email-profiles to 5 increased - Possibility, to send the emails with "Blat" directly (http://www.blat.net) controlled over WsWin Blat must be set aside in a "search-path-folder" to it - > for example under C:\Windows additionally, one can set an "optionfile" = blatconfig1.cfg.. blatconfig5.cfg, in accordance with the 5 possible email-profiles, the option file must be stored in the WsWin-program-folder! - Additional command line start-parameter "/ER" - > send email-report at automatical program start. - Possibility of sending email report every 1,2,3,4,6 hours - New variables and alterations for variables - specifically for WDLive with ws_calc, it becomes with not number-value, now the 1. Parameters returned (early "blanc"-signs) Variables for sun-rise /sun-set for arbitrary data - TE923: re-calc of the Wind chill-Temp altered on Wind-Temp - Data become for 24 hours use (for example synop, variables), the program switches to 24 hours view. (can be disabled) - New time-control: sunrise/-set, additional time-control - the year-file and with it statistics-data is always updated now (even if internet-files updateing not activated) - if set produce "each weekday a graphic" (day1.gif... day7.gif) and preparation is behind longer, the program now gets this automatically after. - now is with sun / moon a direct "paging through" is possibly (if selects date was chosen), now becomes furthermore here the highest sun-stand (Elevation) additionally indicated - carry along grow-frost-days (if a grow sensor is set) - bug at location at cordinates of 0 Grad North or East solved V2.93.7 2006-10-25 - Consideration at VantagePro, if the standard outdoor temperature sensor isn't the main outdoor temperature sensor. - Consideration of not existing rain-sensor in statistics-data. - Wave-file-creation every hour should work again. - Creation of UV-instruments-graphics of TE923 now possibly - Optimized and new variables specifically for WDLive V2.93.6 2006-10-19 - Awekas: Transmission time all 30 minutes should now work - with TE923, now is also the long-time -UV-value determined - Wave file creation can now also adjust to every 30/20/10 minutes V2.93.5 2006-10-11 - Support of creation of aweaks.txt removed - please use now "Direct Link" - Adaptation for difference-sensor as solar-sensor: Shows in the Min./Max. bar also clouding and sunshine-time. - Bug at TE923 and almost filled data-lugger-storage solved (only data of the last records were read out) V2.93.4a 2006-10-05 - Bug: not saving settings for "Create statistic dates" solved V2.93.4 2006-10-03 - Now carry along reception-statistics at recording for the station Mebus TE923/Irox Pro-X -> the corresponding variables (% ws_state_sens [x]%,% ws_stateakt_sens [x]%, '% ws_akt_sens [x]%, %ws_colorstate_sens [x]%) now are also valid. - at automatic generating of historical data the program ignores values of the first day in new month V2.93.4 2006-10-01 - with Mebus TE923/Irox Pro-X and UV-Sensor, the mean values at month and year now are calculated and shown. - with File-Watching and set weather-station VantagePro and data not from VantagePro (for example WS2300/WS3600), the day-min values come back correct. (issues from V2.93.3). - with Mebus TE923/Irox Pro-X, there now is the possibility under Weather station, Adjustments (need that the recording didn't run) to correct the data record pointer. -> necessarily, if one has reseted/cleared the station (Mebus TE923 / Irox Pro-X) manually. V2.93.3 2006-09-25 - Now supports difference temperature sensor for sunshine - especially for Mebus TE923 / Irox Pro-X. Activate under Weather station, Special sensors and here with solar. - Combines automatical at the VantagePro for main outdoor temperature the min and max values V2.93.2 2006-09-19 TE923: Bug at rain and read out of the datalogger of the station solved. V2.93.1 2006-09-17 all TE923 - Corrections for texts. At alteration of the station name, this immediately is shown. - Adaption, if another program locks the USB - Port. - Consideration if first Record has initial-values - Consideration if storage-size is passed - Consideration if hardware version alteration (newer station) V2.93.0 2006-09-14 - In the case of the Test Version the possible ONLINE time was increased from 90 minutes on 3 hours, in the same way and at available data logger all of the stored records are completely "read out". - Support for the TE923 (MEBUS, Irox, Honeywell, RTS) Information on that: these stations are available in 4 hardware implementations, marked in the program with HW1..4 - HW1: Memory 8 KByte (208 records) - one can alter only the storage interval (5..1440 minutes) over computers - HW2: as HW1. Additionally, one can over computers alters: Location altitude, temperature alarms, wind/rain-Alarm . As well, HW2 prepares real time data for picking up all minutes! - HW3: available with different memory implementations (8kB, 32kB, 64kB and 128 kB), with Memory 128 KByte = 3442 records - otherwise like HW2 - HW4: as HW3 additionally, one can alter over the computer the CityInfo for Local and Selected Settings and can also change Time Alarms, (Single-, Weekly- and Pre-Alarm). Peculiarities in context with WsWin: If you receive an interface error at starting or changing to "with Interface", so a reason for this can be: the helper file "usb.dll" is not available in the WsWin program folder. If an option is not selectable at this station, the hardware doesn't support this possibility. - under "Weather station, Status interface" find you information about the hardware and current weather data - under "Weather station, Settings" can configure this station. - with HW2..4 you can choose in WsWin whether you want to use the real-time dates all 1 minutes or all 2 minutes or the possible datalogger ranges (5, 10, 20, 30, 60...) To heed: if the chosen storage interval exceeded one year of "storage duration", WsWin don't allows these selection! (with the 3442 data records the duration would reach up to the year in 2016) WsWin restricts the max. Ultraviolet-value to 25.5 UV-I! With chosen option (default: ON) WsWin converts the ultraviolet values onto values similar to the VantagePro. Always the original values firmly held as "UV X" (id=9), with not chosen option are Ultraviolet and Ultraviolet X identical. WsWin observes the sent wind chill values as temperature value (id=8), this value is is back-calculated as value without Wind influence (id=7). Difference temperature (id=10) is formed from the out door temperature (main outdoor sensor = dewpoint sensor) and sensor ID=7. This value is planned for recording of sunshine duration. - Possibility for Windrun to choose also the wind gusts (under View, Adjustments) - Possibility to let produce graphics automatically for the statistics data after month change (new month), -> monthlongtime.gif, longtimecalculated.gif, longtime.gif, year-covered: rainsun_y2006.gif, his_y2006.gif, wind_y2006.gif, clima_y2006.gif, minmax2006_1.gif, minmax2006_2.gif - Internet settings for Wetterarchiv and AWEKAS now also under Internet, Adjustments. - Internet-Update-Times for Wetterarchiv and AWEKAS now separately and settings for it under Internet, Adjustments - Possibility now to send the data to AWEKAS also every 5,10,15 or 30 minutes. - When exporting of the monthly-data file, single-sensor-monthly-data file or all monthly-data files now become combined sensors with-consider. For example: 1+4=6 is exported, 1+4=4, it is not exported since the data of an original sensor would get lost here. - with VantagePro, now the default-indication at ET is process, can under View menu, Adjustments put back on the previous statement. - new variables, sees custom_en.txt and V2.92.6 - Error solved: in case of input of the position coordinates and -0°, it was not taken over negatively value - VantagePro: in the recording operation, no data became stored, if no wind data existed. This restriction was removed. - VantagePro: The program uses now the rain calibrating-factor what is entered under "Calibrate rain quantity". Please check your rain calibrating-factor: should be usually in 1.000! - Supports now a modified temp./humidity sensor for the single month export as solar sensor - for later import/mergen with a VantagePro weather station. - Adaptations for weather station TE923 and import of the Records.txt (from WeatherCapture). One can now choose whether the UV-values of the TE923 should be tried on at the values of the VantagePro. - Solved bug with ClimaLogger: as a humidity 4 the inside humidity was stored, please convert data completely again (rename old ws*.dat files before) V2.92.5 2006-05-29 - Bugs resolved V2.92.4 2006-05-27 - APRS/CWOP news now can reported with the included program WsWinAprs.exe (with existing internet conection). The using of VWSAprs is no more necessary with it. The support of VWSAprs is probably discontinued in the future. VWSAprs sends the data under the software-identifier Virtuel Weather Station, WsWinAprs sends the data under the software-identifier PC-Wetterstation. From APRS/CWOP had been the wish for a long time to introduce this differentiation. Please put to it under Control, Parameters Template/APRS/Synop/Metar... and here under APRS your data and activates the option "WsWinAprs" (and when recording Aprs-Datei generates) If you don't have yet any identifier with APRS/CWOP, so you register yourself under http://www.findu.com/citizenweather/cw_form.html to the receipt of 'unique "CWxxxx" identifier' This service is free and you don't become advertisement (as with Wunderground)" If you input your data, goto File, Options, Time controlling2 and here in the area "Extra1" click "= - > WsWinAprs.exe." All necessary data then are brought in, you only must set the time (5,10,15,30, 1h etc..) when the data should be transferred. If this button is not available, no data are entered with CallSign-ID or the data file WsWinAprs.exe is missing in the Wswin program folder. As well, it is important that under weather station, location the correct location-coordinates entered is! Many thanks go to Steve Hatchett for his help. - You can combine the Time controlling2/Extra1 with the Time controlling3/Extra2: For example with Extra2 starts a program, with Extra3 this program control with key codes and then close the program after the set time (Quit program) from Extra1. - VantagePro: control your rain calibration factor (under Weather station, Calibrate rain quantity...), with not modified rain-sensor must stand here 1.000. - Possibility to update automatically internet-data files (like year-, month- files) now also each 12,6,3,2 or 1 hours - Bug solved at Synop and station-air pressure (doesn't involve VantagePro and Mebus stations) V2.92.3 2006-05-07 - Bug at rain and unit "inch" when altering the data solved. - For ET (Vantagepro) and simultaneous showing of the rain values, the shown ET values are now correct. - new variables: %ws_rfc822datetime% and time of value changes: %ws_timetoval[09:14]% = 9.23 - With VantagePro and chosen DebugMode-Bit "9", a data file vtrain.txt now is carried along (to recognizing the rain-duplication)! V2.92.2 2006-04-24 - At chosen weather station "TE923", the UV-Sensor now is available also with Mini-graphics, Minidisplay and Html. V2.92.1 2006-04-22 - Bug at the production of current-graphics with the view profiles solved -> the instruments graphics were no more produced. - Bug in Synop and sunshine-time last hour (553xx) solved - with the usage the of 3 extra graphics-preparation-profile, now all settings of is are used (Size, color, Min.-/Max-Displaybar, font color...) V2.92.0 2006-04-17 - some inconsistencies resolved - Program takes into account with autom. Scaling, that the zero-degree-line appears no more outside the diagram - in the Awekas.txt, also the snow-height is passed (snow-height must confirm at least every 3 days under Weather condition) - Adjustment-pixels at graphic are now takes into account again - with the * _mpast[...]- variables now also negative values for month in the range -12..0..+12 (0=Year !!!) are allowed. - Possibility of the reverse publishing of values with Template and current day - >% templatereverseday% -> must in line before %templatebegin% placed. - support the Climate-logger - with File-Watching and converting of the data file (history.drf) here WsWin can steer the program "Thermo - Hygro Data Recorder" with the Keycodes={_A_DN}di{_A_UP}", (for the autom. Read Out) -> over new "Time controlling3" (under File, Options) - support the updating more frequently of the air pressure with the VantagePro (1,2,3,5,10 minutes) as standard intended of the weather-station (15 minutes) A problem should not be withheld on that occasion: (mainly with VantagePro1). The firmware of the Console has apparently a problem with this sporadically. Notices: if suddenly "beeps" the console and then also a air pressure of about 680hPa is shown. WsWin corrects this mistake normally. The Console and also Weatherlink hold on to this low data record and falsify the minimal-value of the air pressure with it! - One can now use (without temperature/humidity-adjustment) the Altimeter-Air Pressure with VantagePro and assignment at CWOP (APRS). (Setting under Control, Parameters Template/APRS/Synop/Metar... and here under APRS) - Option for File-Watching and no new data since x.. minutes: Automatically stop / start of the recording. - Possibility, to produce additional Aktuell.gif-Files (current) with the settings of the 3 additional view-profiles. With the file name, the profile-number then is joined for example: View profile 2 -> aktuell_2.gif as well as 20060322_2.gif - With not available COM2-Port, it is switched automatically to COM1. -> in former versions, the next lower number was applied for COM2..COM4 (or to COM1). - Possibility of the production of a general monthly-data file (month.gif) - sees Internet, Adjustments, Graphics - Possibility to import the Records.txt from (MEBUS-Station), under File, Import Weather data here under "TE923" - here, additionally also the weather forecasts are taken over, is tried the Wind chill-value (the wind-sensor) furthermore has an independent temperature-sensor in it, back-adds to held on on the measured temperature-value as Temp6-value. The UV-values are imported with a solid factor by 0.444 - with this, you get the same values as with VantagePro. - As well, there is the possibility to select the TE923 (Mebus, Irox, Honeywell) as weather-station as preparation on the future direct support of this station. - Possibility of the indication of the snowfall-border and cloud-sub-border of the weather symbolic file (current.html)) V2.91.7 2006-01-05 - Bug at VantagePro2 and firmware May 27 2005 and simultaneously time set at program-start solved: This firmware has the peculiarity that they at alterations (also the time) the Reception-data (reception packet, lost packets, packet in row etc.) all on 0 is placed. That became in the program with the Calculation of the reception-quality until now taken not into account. - Alteration of the timeout with email sending from 30 seconds to 60 seconds and email attachemetns are no more "MIME" coded. V2.91.6a 2006-01-02 - at weather-station VantagePro (in the online-operation) also now is + Automatic read out weather data at start + Automatic close program after read out possibly - correction at week (day new year - week last year) - correction at week files creation V2.91.5 2005-12-28 - the program now "tolerates" again data with same time-entries - new variables - sees custom_en.txt and the entry V2.91.5 - Consideration if in the online-operation of the VantagePro the day-rain-volume is put on "0." - at online-operation of the VantagePro now become also for temperature, humitity, Leaf, Moisture and wind-direction the adjustment-values applied. -> they are not used with ET in the online-operation! -> with what I hold it more meaningfully, to input the adjustment-values for temp, humitidy and wind-direction in the VantagePro Console - > Look at Weather Station, Settings, CAL The calibration of temp, humitidy and wind-direction supports the Console directly, other values not! V2.91.4 2005-11-26 - Support for program language: Spain - Some corrections - what me so stood out... - new variables for values with different units - new variables for texts for all supported languages - independently from chosen program-language - Adaptations at online-operation with VantagePro and more slowly/delayed transfer for example with USB-serial adapter - Possibility, to set date/time of the VantagePro console with date/time of the computer at program-start (it is only done once on the day even the program starts more frequently) V2.91.3 2005-10-24 - Adjustment at the APRS - wind-data and additionally utilization of Solarradiation - Adjustment at the wind-directional-indication and wind-speed 0 - If the connection to the weather-station (VantagePro) is interrupted, the program stops after 7 attempts to get get connection (DAVIS USB - serial - adapter) - New option: Befaufort after DeutscherWetterDienst (not WMO) V2.91.2 2005-10-16 - Bug when updating the yearly-data file solved - Bug at creating of the Synop solved - for the grow sensor was the average value used instead of the minimal-value - Additional values of wind in Synop - If after the "Waiting-Operation" the Com-Port cannot be opened (because the other program still runs), no more a Messages window appears, however the program tries all minutes to resume the operation. - With APRS, one now has the possibility to choose between APRS-standard and NOAA-standard. V2.91.1 2005-10-03 - bug with File-Watching and station typ WS2500(-PC) solved (error synchronize) - Bug at Waiting operation solved: After using of Settings and/or Status and closing the communication was for 2 minutes deactivated. - Bug and time values (0..30) for updating customised user Html/Wml file solved - For the wind-instruments the gradient lets itself now disabled. - New variables for NRT wind in knots (%nrtwindkts%, %nrtwindgkts% ) - please update your ws_clientraw.txt. - The yearly-data file now becomes autom. update if one did an alteration in behind months and after it the yearly view is chosen. - Possibility of the control of the customised/template files about a Controll - data file: wswin_customfiles.cfg: Look under Control, Settingss Template/APRS/Synop/Metar... and here at "CFG Custom file." You have the possibility on this occasion to alter this data file, to be in the habit of and that automatically the program builds this file with your data: Be sure that there the option "wswin_customfiles.cfg activ" is not chosen and the Option "create/update wswin_customfiles.cfg" must be chosen! - Caution: if you leave this setting-window and again goto to this setting windows or the Program is cloesed, this setting is deactivated automatically! After activating, you should - Update Internet files - Customised Html/Wml file(s)... - all Template data files (in the corresponding view maybe week, month ...)) execute. Build-up of the Control file: 1) start-name 2) number of data files (with 0, no data files are worked off) as well as the control file is turned off! 3) data files, with what the first data file always must one identically with the start-name and also must exist! If a semicolon is after "=" and before the file name, this data file is ignored, however must be with-considered in the number! Example: [custom.txt] #=4 1=custom.txt 2=custom_.txt 3=;schnee.txt 4=statistik.txt If you control the working off over the wswin_customfiles.cfg (Opton activated) all "&open..."- Variables in the data files ared ignored. As tip: nevertheless still use these variables, you can then choose easily between both possibilities and so that has "built" the control file also again. Disadvantage of the utilization over the control over the "wswin_customfiles.cfg": Here, it is not possible to use control files dynamically: construct the file names with variables. V2.91.0 2005-09-25 With this version also the operating systems Win95, Win98 and WinME are again supported !!!! - Bug at reading out the data-logger of the VantagePro solved. - Updates of the yearly-data file with the monthly-average -Max -Min data altered. - Alterations of the instruments: Indication of the min./max-values as tool-tip, window menu-position is kept, Shifts from the min-/max-values, that refer it to the representation-time (only for day). New instrument for solar-radiation as well as Brightness - VantagePro and online-operation: For UV, solar, wind, wind-gusts, rain is considered the adjustment-values. The temperature-values and wind-direction should be corrected in station!!! (When importing, file-watching and activated option "use correction values" a l l in setted adjustment-values considers. ) -> like until now. V2.90.3 2005-09-17 - Support of Wedaal (Wetterdatenauslese - www.wedaal.de) with generation of the wedaal.txt (analogously to awekas.txt) - Representation at statistics data of the rain-days with/without rain-term-sensor. - Interval-times for online-operation (only WM918, WMR9x8, VantagePro, weather-sensor-receivers) now are "lined up", if no rest remains with 60/interval (1..6,10,12,15 minutes) V2.90.2 2005-09-13 - Bug at sendigng data to awekas solved - there was the wind direction send for wind - When generating the instruments-graphics, the color-reduction was switched off -> gradient better. - For rain-days, also the rain-duration-sensor (= time sensor) is now used. - Bug at setting/changing the online=recording interval time for the Vantage solved V2.90.0 2005-09-10 - Bug with Longitude and Latitude and negative values solved - Bug with the alarm-values solved: the program-internal units were always passed out. - With "update tables/graphics ..." and also "day" chosen, also the rain-rate/hrs and the maximum Air pressure-alteration per hour are new calculated. - The showing of the average min- as well as max-temperature in the Week-Html-Tables are removed. - Support of the VantagePro from Rev. B (firmware from April 24, 2002) and the VantagePro2 in the direct online-operation with the corresponding online-variables, for example %ws_batteryvt% %ws_totalpacketsvt% etc. Who uses the VantagePro Online in the pause-operation-mode can use the Weatherlink-Software additionally online, provided there on the "Vantage bulletin" as well as "Vantage Summary" is abstained. This function requires permanent access to the matching unit and WsWin would not have any more access-possibility with it. Another possibility passes (also under utilization of the Pause-/Waiting-operation) the Weatherlink intermittently the data be able to pick up from the weather-station. Must to it in the Pause-/Waiting-operation as external program Weatherlink (for example) "C:\WeatherLink56\WeatherLink56.exe" set, as Option (for example), "Home -d" are declared, must furthermore in the time-field mm:ss pause a value <> 0:00 is written down. Meaningfully here 1:00 or 2:00; Weatherlink has 1 minutes with it as well as 2 minutes time to pick up the data. Consider: It is possible only in the registered version, under Weather station, Adjustments, EEPROM, to write data back on the VantagePro EEPROM - although the buttons are active. Here, you have the possibility, presupposed corresponding knowledge, to modify each EEPROM-Byte of the VantagePro. (for example to the adjustment of wrong rain-values etc.). The utilization of this function happens only on own responsibility, all liability for it is from-closed. - Possibility of the production of Instruments graphics for Outdoortemp, Dew point, Wind Chill, UV, Rain, Outdoor Humidity, Air pressure, Wind, Wind direction and Wind gusts (provided the Weather Station are give the corresponding sensor value). These graphics are created in the same time, as the Aktuell.gif produces - there here even the program repuires the Main focus! - Possibility of the production of a Synop file - Possibility of the production of a Metar file - New Option for recording interval >= 2 hours -> under View, Adjustments, chooses the option: "Day: always show lines" such measuring points are connected with it also with a line. - Additional support of a Time-Template (template_time.txt). Which is in a solid time-screen from 5,10,15,30 or 60 minutes is worked off (offset to it possibly) . - With the Work off of the Custom-files (custom.txt/wap.txt) during the recording, now passes the possibility, to do this only each always=0, 5, 10, 15 or 30 minutes. - Possibility, to pretend the delimiter and the decimal-delimiter for the monthly-data file-export: 1),0.1, 2);0,1; 3);0.1; - Possibility, to also send the weather-conditions automatically to AWEKAS, - sees Weather, Weather condition. Consider! You must activate this function for www.wetterarchiv.de again. Set at wetterarchiv and/or AWEKAS the option "active"! V2.85.11 2005-07-01 - for the variables for 2. Long time temperature sensor (%LT_Temp2Max%/%LT_Temp2Min%) now becomes "- -" as well as "--" spent, if no sensor is chosen for it (that these variables were not dissolved earlier..) V2.85.10 2005-06-26 - The working off of the Test-Template "template_test~. txt" now is steered over option (no more, if existing) - Bug in hour number with humitity over 90 percent solved - > it is necessarily to update the yearly files! - Bug in week representation and wind direction and only one value each hour solved. - new variables (specifically suitable for WDLive) see wap-row-files: ws_clientraw.txt, ws_clientrawextra.txt and ws_clientrawdaily.txt - new variable% setdatepast[dd~mm~yyyy]% for defined allocation of the using date if YYYY=9999 - necessary for template_proplant_y.txt -> for %growtemp14[00~00~9999]%]% as well as %relhum14[00~00~9999]% are wrong date used - for all new variables, please look in the custom_en.txt for V2.85.10! - Possibility of export of all monthly files - are stored in the folder ".\AllData" -> see File, Exporting..., Export all month files ...: here Data Files choose! and the possibility, to import all these files again (if folder/files ".\AllData\exp *. csv" existing) is with existing brightness sensor, lux = WS2500, - sun stand correction chosen and activated calculation this Solar radiation W/m²: the solar radiation value is also presented in the monthly export file! (If WS2500 transferred - > VantagePro...) - In the mini display and for the day mini graphics, one can choose the ad of the 10 min of average value for the wind. -> Production of mini graphics only possible, if the biggest, saved interval is smaller then 10 minutes!!! With data gaps no 10 minutes of average mini wind graphics is generated . -> File abbreviations: w10 - > Example: mini_currentw10.gif V2.85.9 2005-05-18 - Bug at customised Html/Wap-files and using of a path at %customfile= ..." solved - new debug mode for creating of Html/Wap/Template- files -> view for broken "line" V2.85.8 2005-04-17 - Support for data of 1938-2038 (formerly 1980-2038) - Possibility to produce a Hardcopy of the weather station status windows , - > double-click in the window area! - new variable for current value at the exact time: % curminmaxhour[5,h,id]% h: 0, 1 ..24; id: Sensor - generate wind directional text% makewind_txt[v]% v = 0 ..360 -> normally require the 24 hours view (not day view) - New variable to converting of blank characters and umlauts %ws_modtext[das is äöüß only one tests]% - for example necessarily for WDLIVE - > result for these example "das_is_aeoeuess_only_one_tests" - the program now is more tolerant with the Calc-variables and values with "given" units". for example %ws_calc1[+]=%avgval[35]%~10 km/h~1% this now is accepted (without using %unit_off%) However, it is recommended to work still without units as well as with "%unit_off"%. -> Acceleration of the working off! - with the variable %customfileappend=.....% you can now form your own data file row. -> the content becomes here, that itself from it %openfile=...% yielding data at an existing one File (chosen with %customfileappend =....%) joined! -> not possibly at speech creating with custom file -> for all new variables, see in the custom_en.txt and look for V2.85.8 V2.85.7 2005-03-28 - Bug with the percent values in the wind rose graphics (wind distribution) solved! Faulty percent values became presented since updating of a software-component in April 2004 {about factor 1.11 to low} - the graphics representation is correct - new variables: the possibility exists with it, to produce an interface to the program proPlant -> it is necessarily to choose a "Grow sensor -5cm" under Weather station, to let updated all yearly files (values for hours with humidity >=90% etc.) look also to the example-Template: "template_y_proplan.txt" - php - files specifically now become as HTML files treats and becomes, if no path statement with %customfile= contains, now also in the HTML - folder stored. - please take this into account, if you let "*.php" - files generating. - for %customfile= now allowed the variables %ws_year%, %ws_month2%, %ws_day2% and %ws_yearfolder% too!!! example: %customfile=my file %ws_year%%ws_month2%.html% V2.85.6 2005-03-14 - Bug in the saved monthly data in the year file and rain days for rain with 2mm, 5mm, 10mm, 20mm solved! Please update your yearl files! - with the snow graphics, the season representation now is default-wise active in the northern Hemisphere (relocatable back on yearly opinion possibly) - For the frost, there now is an individual Debug-Option - please activates, if the long time duration frost itself unchecked alter. V2.85.5 2005-03-06 - At the History - data "year" you can "browse" also the monthly data of this year - The monthly data for the user-definable values/day >= as well as <= and the Heatdegree - days now are stored correct in the year-file Therefore you must updates your year - file(s) again!!!! (Under Internet, Update Graphics/Tables... and here Year-File and the complete time period of your data inventory chooses) V2.85.4 2005-03-06 - At printing of the year history - data (under Weather, statistics dates, year) now is considered the actual paper height. - The calculation with two past data now is taken into account: Example: % ws_calc[+]=%minval_mpast[0~00~2005]%~%minval_mpast[0~00~2004]%~2% Earlier only possibly with: , Example) %ws_setmem[21]=%minval_mpast[0~00~2005]%% %ws_calc[+]=%ws_getmem[21]%~%minval_mpast[0~00~2004]%~2% - at the weather symbolic file (current.html), the last frost now is represented as well - provided valid data existing and the corresponding option, under Internet, Adjustments was not deactivated. Necessary graphics file about is "frost.gif"!!!! - there now is an individual option, that the setting "Available from": unconsidered leaves, (under View, Adjustments). This option has only effect on the diagram representation - is not valid for tables, min./max. etc. -> necessary for configuration, test mode. - there now is an individual, independent TEST-Template-File "template_test~.txt" - this file is always "worked off", if found in the data path! - bug at variables %avgmintemp_mpast[mm~yyyy]%, %avgmaxtemp_mpast[mm~yyyy]% and month 01..12 (not year=00) solved. - bug at distribution wind direction and here year wind force view (in BFT) solved. You need to update the year-file!!!! - Variables with outstemp%, outshum% are no more supported! V2.85.3a 2005-02-28 - Supplement of the variables for last frost beginning, longest frost, with separate edition for time as well as date V2.85.3 2005-02-26 - additional variables (wind direction, distribution wind direction) for monthly-/yearly values - additional variables with time and date for beginning last frost day, beginning longest frost, end longest dry period - At the History data of a year (Weather, Statistics Data, Year) now is presented all year specific data (among others rain days for different values, degree days, percentage share wind in Bft, wind distribution...) Attention! This is the last version, which supports the variables with outstemp, outshum (for example. %curvaloutstemp% ). V2.85.2 2005-02-20 - the program now carries along also the month and yearly value if yearly files are used. Attention! The program doesn't update these data a u t o m a t i c a l l y for older years!!! I.e. with utilization of these data (in history and/or variables), you must singularly goto Internet, Update Graphics/Tables ..., choose here your existing time period and pick "year file" as option. The program then supplements the yearly file(s) which the month-/yearly data. - Recognition whether year file is current was altered - it gave problems with the monthly change, the last month wasn't updated correct - With existing month-/yearly data in the yearly file you can see these data also under Weather station, History, Year or using with the variables. For the first time you have access with this to really all existing data of the program about variables - Bug in week view and sporadically appearing wrong min as well as max values solved. - The program now has an option (under Weather, History) with which you can compare the monthly/yearly sun times with long current values. - The program now carries along also the "last frost" additionally to the "first frost" of one year. Furthermore the longest frost period for the existing data. The current data about it find you under weathers, weather forecast and here in the new Tab "History data" - everything "news" is supported with corresponding variables! (see custom_en.txt) V2.85.1 2005-01-08 - Introduction of year-date-files: In the Case Of the first showing (manual or automatic) of month or year view the program creates that one additional year date files - according to the available dates that can already last something. Using of this can be deactivated under View, adjustments! Benefit of the year-date-files: The representation of the year view and also month view (here if the dates are current) occurs just as quickly as the day and/or week view. With Variable you have access on all available last day values! - Corresponding new variables (look at custom_en.txt too): Average x-day %avgvalpast[id~dd~mm~yyyy]% Min-value x-day %minvalpast[id~dd~mm~yyyy]% Min-time x-day %mintimepast[id~dd~mm~yyyy]% Min-date x-day %mindatepast[id~dd~mm~yyyy]% Max-value x-day %maxvalpast[id~dd~mm~yyyy]% Max-time x-day %maxtimepast[id~dd~mm~yyyy]% Max-date x-day %maxdatepast[id~dd~mm~yyyy]% id: sensor - id dd: day -9..00..31 must to be always two-digit mm: month -9..00..12 must to be always two-digit yyyy: year must to be always four-digit, -001 is last year for 00 and/or 0000 current day/month/year is used if negative value occurs: prioritaet day, month, year. That is, if day is a negative value, month and year automatic set onto the current month/year. In order to step up the processing of these variables, for chronological execution you should summarizing the same time dates. . Examples: Average x-day %avgvalpast[0~-7~00~0000]% Average x-day %avgvalpast[2~00~-1~0000]% Average x-day %avgvalpast[2~00~00~-001]% Average x-day %avgvalpast[0~21~12~2004]% Min-value x-day %minvalpast[0~00~00~-001]% Min-time x-day %mintimepast[0~00~00~-001]% Min-date x-day %mindatepast[0~00~00~-001]% Min-value x-day %minvalpast[0~21~12~2004]% Min-time x-day %mintimepast[0~21~12~2004]% Max-value x-day %maxvalpast[0~21~12~2004]% Max-time x-day %maxtimepast[0~21~12~2004]% - Allow "overdriving" too the intern limit values for sensor correction /- factor. - alternative calculation of the solar radiation from intensity - Problem with week 53 solved V2.85.0.6 2004-12-18 - Consideration that the frost days are counted at Tmin<0°C (not Tmin<=0°C). Please amend your Templates correspondingly! - Consideration of the setting at properties of the sensors "Available since" in all procurement (not more only in the case of Html tables) - Consideration of the (abs)-humidity in g/m³ also in Mini-/Single graphics. - Possibility of the advertisement of the current values of all available sensors in tabular form while clicking on date/time in the display bar. V2.85.0.5 2004-12-05 - Correction in the case of showing last rain in the minidisplay and too small field - at status WMR9x8 the difference of the last reception in seconds is signaled now - Korrektur bei Anzeige letzter Regen im Minidisplay und zuwenig Platz - bei Status WMR9x8 wird jetzt die Differenz des letzten Empfangs in Sekunden angezeigt V2.85.0.4 2004-11-26 - Now supports the final Version of the HeavyWeatherPro 3600 - Software - Data file -> the data file between the Beta-Version and the Final Version are different! - With ELV-Weather-Sensor-Receiver and rain sensor and reception problems (not receives dates) that is considered now. (up to now the rain amount "was repeated" here until valid dates were received) - Documentation of the first frost/cold day of the year (with time of the minimum value of the corresponding day) - Changes at Minidisplay (with no menue) - At WS2300 the UTC-Reference-time is used now for the time dates -> for Central Europe user no modification -> for all other now also correct date/time representation (many thanks for this purpose to Peter Bennet, Australia) - Error Recovery at use of °F and variables %curminmaxhour[4,h,0]% (Difference) and/or %tempchange[x]=mm% - Possibility also to correct the rain at the Vantage (Weatherlink) over a factor. - New debug-option: At "File Watching" controlling rain(File Watching Rain). - Advertisement time of the tool tips (Insertion at mouse position) increased from 2,5 sec on 10 sec - MiniDisplay: other handling for weather forecast advertisement - when chosenly, own text line, - otherwise chosen, also the forecast graphics are not displayed anymore! For a correct advertisement you must "call" the properties of the minidisplay and exit from the properties of the minidisplay with "OK" - Support of the data file of the WS3600 = "File Watching" - new Pause operation (was the reason for the BETA-versions) - own month time sections for cloudiness - necessary in the case of unfavorable solar sensor mounting or valley layer - a few new variables, for example the sun time directly from the WS2500 (only as variables), weather comment from weather file, Week, week period - new command line option for data transfer to wetterarchiv.de at starting - Bug at tables and use of other units in the event of the wind than k.p.h. and at the time showing BFT removed - Text output for dry season /dry duration changed (because of french Speakers): at 0 hours the hour output becomes omitted. V2.84.9b 2004-09-09 - Color falsification with use of dashed chart-lines solved V2.84.9a 2004-09-03 - Corrections at Plausibility correction and Wind and WS2000/WS2500 Stations Correction now at 14*Interval or >60 km/h V2.84.9 2004-08-30 - Bug at autom. converting Weatherlink month file solved: if last data record was the 1st data record after midnight, this day was ignored - additional ShortCuts for representation of Main single sensors - additional inspections (for wrong data) in the case of the import of VWS-data-file. - additional alarm for rain (Rain amont +) Caution: when at first rain alarm also current value is prepared (= 0 hours), this additional Alarm becomes ignored. V2.84.8c 2004-08-22 - High-Sporadic fault corrected while converting the Weatherlink month-file (1. Day or hours of that were skipped) V2.84.8b 2004-08-11 - Inspection whether valid air pressure dates for wetterarchiv.de changed from absolute to relative air pressure - Path length + file name for export file increased to 255 chars. V2.84.8a 2004-08-09 - Correction for the Dutch translation at shortname for calender week -> WK - Additional error texts at: to much Custom-Files, Template-Lines and not setted %curminmaxhour_on% variable V2.84.8 2004-08-08 - Possibility for rain alarm a period between 1 and 24 hours choose - Bug fix at alarm and brightness sensor (klus) - Multiple alternative of email-configuration at alarm-email (1..3) - Corrections in the case of minigraphics and advertisement of the min./max-value in the case of created mini-graphics - New variables for Near Real Time - only relevantly for weather stations without data logger/file-watching: WM918, WMR9x8 and weather sensor recipients - these variables refer to the value/time of the receive date - support through a new control file: wswin_nrt.txt - New control file: wswin_nrt.txt (near real time) (Activation under Control, NRT-Flash) - this file is executed immediately after arrival of a new value (see also above) - at the most 2 nesting (therefore in total 3 files) is possible - As default is here set: without unit and decimal separators is a point (people can "oversteer" with control variables) - the currently not selectable control file "wswin_flash.cfg" is planned for the future direct support of Macromedia Flash MX2004 pro. - if somebody has already a complete module for this purpose and can availably set it, is taken over with pleasure. - Changes at %customfile=.\Web\testx.html% (example): it is saved now, that through the use of ".\" itself the directory ever to the program directory of WsWin relates. - All variables with sensor number argument for example %minvalday[x]% allow now also "-1" as a sensor number. If "-1" are used as a sensor number, this variable always refers to the "main outdoor humidity-sensor" V2.84.7 2004-07-15 - Extra settings for day wind distribution graphic - Extra settings for day mini-graphics V2.84.6 2004-07-03 - Bug at recording/autom. converting in the case of change to new month and file watching at WS2300 solved - if at available solar sensor no solar time sensor is initiated, this is done now in the case of start of program. - at autom. reporting to wetterarchiv.de and available solar sensor also coverage is announced: V2.84.5 2004-06-30 - Bug introduced in V2.84.4 solved (at variable %maxvaldayoutstemp%, %maxtimedayoutstemp%) - Bug for the time period title on the wind distribution graphics and the mini graphics solved V2.84.4 2004-06-26 - Changes at %minvalday[x]%, %maxvalday[x]%, %minvaldayoutstemp%, %maxvaldayoutstemp% - there here under certain circumstances the wrong value was dumped. - All variables with sensor number argument, for example %minvalday[x]%, allow now also "0" as a sensor number. If "0" are used as a sensor number, this variable always refers to the "main outside temperature sensor" Possibly the direct "main outside temperature sensor" variables are dropped therefore in future (for example %minvaldayoutstemp%) -> look for the variables characterized with "*" in the custom_en.txt (are the affected variables) V2.84.3a 2004-06-21 - the file name for %openfile=filename.ext% can also be build with variables - at Weather station receiver also USB-serial-Adapter are considered - now supports 64 (%ws_set/getmem[x]=zzzzz%) variables (formerly 32) - new variable for deleting of a line %ws_delline% V2.84.3 2004-06-12 - Bug with Title/Header at Html tables and used background picture solved - Now you can Reset the "last rain" under Weather, Weather forecast (under certain circumstances necessary) after that "goto" to the day with last rain. V2.84.2 2004-06-08 - Hardcoded GIF-Color-Reduction for MiniGraphic "Cloud low limit" - Now the Title/Header at the Html-Tables for each day should be correct. V2.84.1 2004-06-05 - Online activation of Weather-Sensor-Receiver is now possible (was still locked) - more settings and/or status-advertisements for the Weather-Sensor-Receiver - new day's MiniGraphics for cloud lower limit - new Controll-Variables in the case of problems during the speech of the time %ws_time_in_text_on% and for sunset tomorrow %ws_sunsettomo% V2.84.0 2004-05-29 - Support for the ELV Weather-Sensor-Receiver -> Recording time between 1 to 15 minutes -> the program "creates" the Current-Flags - bug at email und text only in the subject (custom_sms.txt) solved - new variables for longest dryness/last rain with own variables for time und date - with option in the case of minidisplay you can again energize the completely compulsory foreground representation of the minidisplay (very left check at option "show MiniDisplay menue") ######################################################################################################### More Version History: V2.83.5 2004-05-21 - Acquisition longest dryness season -> Representation at the History - dates -> choose for the automatic collecting of the longest dryness season Internet, update graphics/table... and here at Day "Dryness Time" - you find the representation of the date of the last rain now under weather, weather forecast - new variables for longest dryness time and day of year (1..366) V2.83.4 2004-05-09 - direct support for AWEKAS -> active this under Control, Aprs/Template, Tab:Template and here "-> awekas.txt" - Bug at "act flag" at brightness sensor solved (act flag never was evaluated) - Bug at "Initiate Sensors texts again" solved (the Modification was only saved, when after that "sensor settings" war called) - Consideration of the modification/deselection of combined sensors and sensors outside of possible sensors -> concerns the sensors with ID=10..16 and ID=26..32 (Sensors stayed in the "background" as available!) - Adaptations during the scaling the sun- / rainy season: among other things now also the possible time limit considers -> rare scaling with 200 minutes - new variables for act flags, pick fault, dry (desert) period and for those ones Vantage user the Week-, Month-, Year ET values (corresponding view must have been signaled before). -> look custom_en.txt - Acquisition of the dry (desert) period (during up to the last rain case) - the program saves now, that at "autom. Internet files update" this is only done, when in fact dates in the new day are available and/or. with a minute offset one can delay the updating up to 6 hours. V2.83.3 2004-04-11 - Changes at mini graphics and wind direction with dots: - now there is always a range from 0-360° - if the graphics size is smaller then 450 pixel the dot is also smaller - if the control varialbe %ws_userdate=YYYY-MM-DD% is used, then also for the corresponding times is 24hour format used (for example 13:00 instead of 01:00 PM). - if no summary graphics lines "# Graphics" (at Internet, Adjustments,Sensors) are chosen, the normal representation is used! - Possibility to import the year date files (for example 2004dbase.csv) of Virtual Weather Station release V12.0x (VWS) Please read for this purpose also in the program help. - now direct operating mode of the WS2500 PC V3.1 and WS2500 V1.0 (not tested with WS2500 V1.1) Attention! The WS2500 V1.0 does not set any wind direction! Procedure to change to direct Operation: 1) Menu Weather station, Interface Typ, File watching: disable here "Watching active" - Close with "OK" 2) Menu Weather station, Interface Typ, click "without Interface" (=enable Interface) 3) Menu Weather station, Com-Port: select your COM-Port, where the WS2500 is connected. V2.83.2 2004-04-04 - Bug at mini graphics and representation of rain solved - at mini graphic and showing wind direction also the option "Show as Dots" is now reflected - new variables for minimal and maximum day values (average value) for month as well as year - new control variable %openfile&remove=nextfile.txt" and %ws_userdate=YYYY-MM-DD% - new variable for wind range graphics %winddrange_gra% - own settings for Gif-color-reduction and gradient for the graphics: snow depth, wind direction and history -> please check your OWN settings! - Possibility to generate PDF files (only anticipated for mini graphics, History and snow depth) Files are stored in %wswin%\PDF. V2.83.1 2004-03-20 - Changes at wswin_xml.txt - now with entry encoding="ISO-8859-1 - New Parameter for snow depth graphics: transparency (range 0-40, 40=default, 0=no transparency) - Changes at the history dates and long-term month dates and here MIN rain/sun and/or average temperature - Possibility use of a Proxy server for the HTTP - data transfer. - The setting for external browsers at weather conditions now is now kept. - own settings for Gif-color reduction and gradient for the graphics: snow depth, wind distribution, history -> please check YOUR settings! V2.83.0 2004-03-13 - new supported language: Dutch and Czechish (but here not some Czechish special chars) - Bug at the weather stations of WM,WMR-9x8 and representation of the time sensor repaired: here the Max-time became in the representation week, month and year not computed. - Bug at converting weather data with WS2000 and/or WS2500-files solved: If the file length of the file to be converted could correspond also to a WS2300-HeavyWeather-file, so wrong time dates were dumped and the file was not converted. - Bug at CSV file check and air pressure value removed. - Bug with single sensor advertisement in connection with brightness sensor eliminates (the date representation and alternative representation in W/m2 did not let deselect) - Elimination of several smaller "inconsistencies" - Optimization of different things: for example: - also negative location height (among others because of the Dutch users) possibly - Ads the itself of yielding atmospheric pressure on being converted of the wS2300-Daten - several Debug-Modi. - when generating a current.html over "customised Html/Wml-Pages" and the Option "Generate Weather symbolic file" is activated then the program now deactivates this option - own indepentend time selection for "aktuell.gif" generation - Priorization of the option "Automatic search for new sensors at program start" at the WS2000 weather stations and synthetic "time sensor" neutralized (with that this sensor "always was deactivated") - in the case of representation of the wind rate/gust in the display bar and "visible tool tip" becomes here now additional the corresponding "Beaufort" value displayed. - Possibility to represent in the display bar LEFT two more sensors, at what, when here the wind or gusts is chosen, here the Max velocity in Beaufort is output! - Possibility of the direct changing of the historical data: -> Change is only possible, if the year is "write-protected" (otherwise this modification would become in the case of view change of this year to get lost) -> where you can only put the "cursor", modifications are possible (for example at computed / dependent values not) -> in the case of the input of time values (sun time/rain time) becomes the colon ": through a negative "-" replace, the time value must always being indicated with 2 minute-numbers and at least a number of hours. The program recognizes the time value modification by the "negative" (and only here)! -> you must energize the "request for modification" with the button "Change", a far actuating of this "button" fuse the modifications without confirmation prompt after a modification, it can be necessary that you must press that one "button" twice, with that that "Request for modification" acting becomes! -> as a period to be considered the beginning year is now allowed from 1901 (formerly 1980). - Possibility the month long-time values and long-term values computed to the new one also directly to print (as displayed). - new calculation and representation of the own long-term values (Temperature/rain) depending on the default long-term values. - Possibility to display as an own climate diagram, to store as graphics "clima_y.gif" or to print these long-term values. - The norm-month temperature levels are managed now with 2 decimal places. - For the time sensor also an alternative calculation is now possible "<= x" (instead of "> x") - for the timing there are now 8 additional, stand-alone times available: -> if as a time 00:00 chosenly = deactivates -> who would like to use only these times instead of the periodic updating, must at "Update time with FTP" 2x choose the same time, as choose to one of these 8 times and in addition as Updating-range "24 hours" -> so that deactivates - for email report there are 2 additional times (with that 5) available - additional time profile in the hour interval for the starting of an arbitrary application - one can affect the times for email-report and/or also program-restart now also over the ws_controll.cfg. -> for this purpose there is a new argument "EmailReportTimeOffset=0" and/or "PrgRestartTimeOffset=5" -> see program help allowed values for EmailReportTimeOffset and/or PrgRestartTimeOffset: 1..60 -> 0 not acting -> with that is set EmailReportTime/PrgRestartTime automatically onto the current time + the offset minutes. -> example: Current time 23:23, EmailReportTime=60 -> the email report is sent at 00:23 -> in other words: who are the present 5 times too little, can over a schedule program (for example also over "Planned tasks" of Windows) these times almost arbitrary enlarge! -> one can rearrange over the ws_controll.cfg also the to use email section (3), for example for different Email-recipient - at email one can change the necessary "Char-Set" now directly: default: = "us-ascii" or "Western Europe" (only at certain Provider necessary!!!) - New graphics from hardcopy function: Weather forecast,weather forecast: double click on "prognosis" -> "forecast.gif" Weather forecast,graphic: double click on solar symbol above sunny -> "forecasticons.gif" Weather condition,weather condition: double click on time-/date above "conditions_yyyymmdd.gif" yyyy=year, mm=month, dd=day Weather condition, Values 1: double click on time-/date above -> "conditions1_yyyymmdd.gif" yyyy=year, mm=month, dd=day, Weather condition, Values 2: double click on time-/date above -> "conditions2_yyyymmdd.gif" yyyy=year, mm=month, dd=day, Statistics dates,Temperature: doppelclick in table -> "minmaxyyyy_1.gif" yyyy=year Statistics dates, Rain/ET/Wind/Sun: double click in table -> "minmaxyyyy_2.gif" yyyy=year Statistics dates, Long time values: double click on "Recording" -> "longtime.gif" Statistics dates, computed: double click in table -> "longtimecalculated.gif" Statistics dates, Parameters: double click on "year" -> "longtimesettings.gif" Degree days, Values>: double click in table -> "degreedaysyyyy.gif" yyyy=year Sun/ Mond, Data: double click on moon graphic -> "sunmoon_1.gif" Sun/ Mond, more...: double click onto "Next eclipse" -> "sunmoon_2.gif" Location: double click on "Parameters -> location.gif" The in this case created files are stored in the "Html"-folder, except for if it is a year depentend graphics and separate years was chosen, these files are also stored into the corresponding "year folder" For the placeholders parameters yyyy, mm, dd are used the corresponding current date dates - for example yyyy=2003. - Graphics Distribution Wind direction/Wind: with the wind rose, one has the option of the labeling after International standard or national abbreviation. - Single-/Minigraphics: Fault corrected: when a modified temperature/humidity sensor as solar sensor was used, became never the "alternative, corresponding" diagram displayed. Fault corrected: if for rain only "Process" was chosen, a pseudocolumn was displayed instead of "Process". - Modification of the representation of the minigraphics in the case of week, month, year view. * New at Minigraphics: For the VantagePro one can let also the wind direction of the gusts of wind here be displayed (and only here). In the case of the entire advertisements in the day view is now displayed the 24h-value and current day value. In the case of the other advertisements (and not chosen alternative advertisement) the average value is shown now additional. One can choose with an option in the case of the graphics, that also the average value (total value at rain, sun) and the minimum/maximum valus is shown. One can activate additionally the representation of the min./max characteristic curve in viewing week/month/year (= default), however, the graphics size must be at least 312 pixels wide and additional "Show total" activated. - In the diagram also the combined values (as already the smoothed ones) become now in the sensor name with one to additional characters labeled! - During the data capture (and/or also file-watching) becomes now at the VantagePro (and/or Weatherlink) in the + Temperature sensor 5 the minimum values of the outside temperature related to the memory range performed + Temperature sensor 6 the maximum values of the outside temperature related to the memory range performed Background: Since DAVIS does very probably not supply any dates here (Temp.Sensor5+6) in next time and/or to have the least users so many Temp sensors (to become) and at greater storing interval than nevertheless 5 minutes can diverge these values, you are carried along now. -> Who would like to have these dates for the past, must clear his DAVIS-WSwin monthly files and new convert it! - The program considers also log intervals >= 30 minutes at the time representation now (time showing) - With the data takeover of Weatherlink, now also deleted records are taken into account. - It is now normally considered at file-watching and "breakdown" of the master program!!! That is one does more absolutely not have "to stop" WsWin and after reactivating of the master program "to start again". -> for the VantagePro owners that means, that the "download" of the data in Weatherlink software (over Internet section) those ones no more the memory range of the meteorological data must correspond!!!! - Possible for identification/scaling of the axis of ordinates and legende (short names) in sensor color -> now default-Setting - One can make the norm-rain-value of the month/year now be displayed in the month and year view. Presumption for that: only in the case of single advertisement of rain, at month or year view, rain as a process, automatical scaling for rain must being energized. - Potentiality of the compulsory wind direction evaluation also in the case of wind rate "0" -> View, Adjustments, Parameters "Calculate Distribution Wind direction < -> 0 km/h of | ms | mph" - Possibility of the "deselection" of the generation of certain Html-tables during "Internet-files" updating. - Own multiple alternative for the representation of the sensors in the summary graphics The former options for the representation in the summary graphic do not become autom. "transfers"!!!! (there now other configuration) Please control your settings (Internet, Adjustments, Sensors and here # Graphics). - For the activation of the representation of the "Statical data" in the Month-/year tables it gives now a own option. - for the Table- heading and/or foot line(s) can one now alternative the dates over the files "table_head.html" and/or setting "table_foot.html" availably. With that, one is not more onto the limitation of 255 characters for the input restricted. * Weather condition and/or wsarchiv.mdb: the air pressure tendency is stored now with decimal places, the air pressure value now always becomes as relative air pressure stored -> the wsarchiv.mdb is not anymore compatible with older releases with that in the reference to the air pressure (value 10000 hpa to high!) - Graphic with snow depth - Support of autom. Upload of the current dates to the www.wetterarchiv.de - Possibility of the Uploads of the "month dates" to www.wetterarchiv.de (only in month view!!) - Who would now subsequently like to store meteorological data in the wswarchiv.mdb (for example special events): Stop Recording, go with cursor at position that dates are supposed to be used, open Weather condition and here storing these dates then. - a few new variables - for example in the case of the time values edition in decimal form! for example rain variance of quantity with reference of the day manner modification (Month value through number days in the month) - in the case of the variables with "user specification" the separator "~" is effective immediately (","=Komma kept on being allowed) with that, possible for nesting with others variables and/or its value use. - three new Variablen types: -> calculation %ws_calc[x]=v1~v2~decimal places% -> value comparison with user specification %ws_compare[x]=v1~v2~right~wrong% - for x: 1..6 = >,>=,=,<=,<,<> -> variables as buffers - Consideration of the finishing at Wave file generation and/or voice edition every hour. - Whose Speech - Engine no negative values (minus) speaks, that can let now correct this with an option - new supplementary template file "template_yest.txt" - here the dates of the day before (=yesterday) are considered - Support XML-dates with the file "Wswin_xml.txt" and/or wswindata.xml - Expansion of the supported COM interfaces to 16 - at what the interfaces 5..16 are not changed to the next available interface more automatically (the interface number was corrected formerly onto an available interface) - Caution! Meteorological data convert of WS2000, WS2500: Consideration of the time zone outside of central Europe. formerly central Europe was accepted general as a time zone (=UTC -1 H). - Caution! The graphic names for the wind direction ("n-ne.gif, ne.gif, e-ne.gif, e.gif, e-se.gif, se.gif, s-se.gif" ...) is now for all languages the same. V2.82.6 2003-07-18 - Bug with Maximum rain on 1. day of month/year solved. - since V2,82.5: there is now a new st gibt es eine neue Statistics data row: "Month longtime values" -> no variables are momentary anticipated for that -> only graphics "monthlongtime.gif". V2.82.5 2003-07-12 - Bug at variable %curminmaxhour[a,h,x]% and hour-time(h) resolved. - Wave-File creating from destination file separated (now first it becomes a temporary Wave-file produces). V2.82.4 2003-07-02 - The humidity values now should at all stations in the weather - report presented again! - The warning function for lacking data as well as record not actively now works generally also at "file - watching" - Expansion of the variable "%curminmaxhour[a,h,x]%", is chosen for the hour value "0" the data refer only to the current day -> even if 24 hours presentation active. - additional variables %mintimecurday[x]% as well as %maxtimecurday[x]%, -> with reference only on the data of the current day V2.82.3 2003-06-29 - The setting at the min./maximum table in month/yearly representation "shows average values" is now valid only for this. -> doesn't have any more effect on the representation in the Html-Min./Max - table values. - Possibility for the internet view (and graphic creation), to insert a text in left corner. -> it is used the text, that is anticipated for the head line in the mini display! -> the chosen font color is also used in footer line at single/mini graphics! V2.82.2 2003-06-22 - Consideration at background picture with the tables if relative path is used for file and if then not relative path Consideration of the year specific tables, that file must be existing only in the main html folder. . V2.82.1 2003-06-21 - the setted Width of the mini graphics is actually also generated now (not more: Width-46) - Bug at WS2500 and representation of the brightness (lux) in the mini display solved - Bug at longtime values and representations of the brightness values (lux) solved - Bug at WS2500, week representation and brightness (lux) solved - Restructuring selection of available sensors - the temperature- and moist sensors now are individually set/deselect able, (because of "only" temperature sensors, i.e. without humidity recording). - Rain calibration factor is taken into account with the plausibility controll Plaus value<=(intervall*3)/rain calibration factor -> with same factor no alteration then before. With factor 1 old calculation (8*Intervall) V2.82.0 2003-06-15 - One can now give an individual name (under Weather station, Adjustments) for your weather station - additional, independent, combined sensor possibly - additional, configureable "time sensor" (for time recording) - Alterations at special sensors - Possibility to set a mimimal limit for the humidity at Readin of the weather data. Allowed area 0 ..20. Will also used at importing and "correct data"! Setting is applicable to all humiditiy - sensors. - Possibility, to export separate sensor values of a complete month. - Possibility to export only the rain data of a complete month, only where rain actually was. - Possibility, to replace the values of a sensor in the monthly file with the values of another sensor, -> With election of the time period and consideration of different record intervals. -> sees weather data importing and here "bringing together" (it can be used the above-mentioned CSV - file with the separate sensor - values of month) - Possibility, to modify also the height, additional size profile (mmini_) and representation a second, affiliated sensor with the mini graphics. - Possibility the Html-files "yearly-specifically" storing in year folders, new variable for that % ws_yearfolder%, the Gif-variables, for example %ws_weekgif% considers this changeover automatically. - new ultimativ variable: Hour values: %curminmaxhour[a,h,x]% a: 0=current,1=min,2=max,3=average - h: 1 ..12 - x:id 1 ..45[46]) i.e., at once 2160 new values are available with it! , with 8 sensors, values [T,H,B,W,R,WD,DP,WC],> 384 values, Since the evaluation and implementation of this variable can be very time of-intensively, one can let also ignore this variable: Calculation hours values closes %curminmaxhour_off% (as well as %curminmaxhour_on%) - Possibility with the file "ws_merge.csv" into a running on-line recording/file-watching, to bring in additional values, as well as, to "overcharge" existing values, - Possibility to generate a new export - file (ws_newdata.csv), where always written down the last readin, current record. -> with parameter "NewExportTxtForImport=1" under [export] in wswin.cfg can this file become as import file for one further WsWin program -> other "header" - for months and years an additional minmax table now becomes generates - can be deactivated - this table becomes also integrated in the "start menu". - Alternate APRS-format - Expansion of the supported COM-interfaces on 12. - Mini graphics and column representation: If chosen "white" as background, becomes the gradients - representation of the column switched off or switchable, under sensors -> with it, at the column beginning also "colored." - Possibility of the takeover of the data of the Weatherlink 5.x software with following restrictions: - by the 8 practicable extra Temp./Hum.Sensors, only 7 are supported (the VantagePro uses actually only 3Temp/2Hum with what) - from the 6 possible SoilTemp/SoilMoisture sensors are only 4 supported - for UV and sun radiation, the maximum value of the storage interval is taken over. - If the very last record of a monthly file falls on 24:00, this time is put back to 23:59! (with DAVIS is 00:00 -> 24:00 o'clock?!) example Weatherlink 2003-01-31 24:00 -> WsWin 2003-01-31 23:59 -> Outlandish data finally are filled with the last valid data (Weatherlink uses here 255, or -255 or -32763) -> the program rebuilds the weathers-forecast-Icons of the weather station (sees to it also under weathers (weather forecast) ... however the representation when is shown rain as well as snow only finally must be determined. -> the long forecast text of the VantagePro can be displayed in the program header. -> There the new Weatherlink software V5.4 also supports the DAVIS stations: Monitor, Wizard, and Perception, this stations are automatically supported in WsWin over "Converting weather data" as well as "File-Watching"! -> to take therefore beforehand, only the VantagePro is supported "on-line" in the future, the other DAVIS - station only over with contering of the Weatherlink file! Hints at the changeover and takeover of the Weatherlink - data: First choose under Weather station, interface as weather station "VantagePro", -> you can under Weatherstation, Adjustments, still set the names at the actual weather station. - Goto File, Converting Weather data, here you pick an any Weatherlink file (Extension ".wlk"), if the File is accepted as Weathlerlink - file, an additional button becomes visibly "All Weatherlink." - With this "button", you can adopt all existing data of the Weatherlink 5.x software all at once (files are searched for from 1998), you must have some patience here, being converted can last something. - After being converted, you go to Weather station, available sensors and selects your sensors there. - After that, you should chooes the "to representing" diagram lines = sensors and their properties (color etc.) - Then: under Internet, Adjustments, Graphics still the sensors chooses, for which later you wants produced graphics, speaking ... - Possibly after that: under Internet, "Update graphics/tables" the further to produce files still choose. - for automatic data takeover (File-Watching) pick under Weather station, Interface, File-Watching the corresponding current month-Wetherlink-file and activate "file-watching" and chooses "converts data previously". -> You have the possibility to let inserted the long forecast text of the VantagePro in the "program header" (Set under View, Adjustments), this text refers to the "cusor position" and you can with it for each possible one Time, that was recorded in the VantagePro, on whose forecast text "falls back", -> At monthly change there is automatically switched to new month Weatherlink file. -> Caution: when being converted with "All Weatherlink" is converted again only months, for which still it no affiliated one(s) WsWin - monthly file (wd_mm_jj.dat), if you want this, deletes before the corresponding WsWin - monthly file(s)! - Calculation of the sun time with existing brightness, as well as radiation sensor and chosen "make sun positon correction" optimized. -> Time in the morning and evening and 100 percent of limit is calculated automatically here and then is closed here. -> It is pretended by the program of optimized correction factors for the individual months -> The "value for 0" percent serves here to fading out of "runaway" in the morning and evening -> The users of the WS2500 can/must adjusts the limit of the sun intensity record level at the atmospheres - HEAD BORDER with the year, (default 180 kLux) . -> The WS2500 users can let the brightness values (kLux) converted on radiation values (W/m²) - with what, these values of course not 100 percent can be. - So-called "tool tips" are shown values for min./maximum/average in the display bar, with it, no more needs for looking of these data not immediately in the minimum/maximum - table. - everything "newcomer" is supported also over the corresponding variables - The "internet menu" = start.html now supports all of the program of produced files (also weeks) -> for example new *rx.gif (reception), *tx.gif (extra time sensor) and all Weatherlink/VantagePro specific files -> besides the daily files "yyyymmdd.gif" as well as "yyyymmdd.htm" as well as "mini_yyyymmddx.gif" V2.81.5a 2003-03-05 - the lost saving of the barotrend graphic color is back again. V2.81.5 2003-03-03 - At file-watching and autom. converting the "takeover" was optimized (actived option under "File watching") - For the WM-918 and/or WMR-9x8 stations there is now a own wind force diagram for wind gust available - The variables for DCF-State with the WMR-Stations becomes now in accordance with the possibilities of these stations. - But with the yearly quantity from Evapotranspiration (ET) solved. - Changes at Wind diagram (Wind force, Wind distribution) - at statistic data there is now allways a complete year presented - ... can recognize this version for the first time the interface WS2500-PC/WS2500 , the status of these appliances show or the interface configures. ... all other not!!! -> functionless! V2.81.4b 2003-02-17 - bug fix for barotrend.gif - selected colours aren't saved. V2.81.4a 2003-02-16 - you can use for the barotrend-graphic independent colors of the mini display (see there under properties) Consider! The color must singularly again pretended/chosen -> otherwise default color is light blue / black - Possibility, to insert/show the "3 own text pairs" in the mini display! - 3(6) own text/value with variables (%ws_own_txt1%...) - New "Summary 4" for the min./max bar, here also "double selection" is allowed, - Bug at generating "barotrend.gif" solved. - Changes and new options at "File-Watching" - new variables (among others for traffic light colors: red, green, yellow, black) - for the wind distribution/wind force diagrams now is own color election possible for background. V2.81.3 2003-01-26 - Bug with the moon symbol representation eliminates (if on a day only moonrise/moonset is, was represented the counterpart of the next day too) - Possibility to use own generated files for the template, and set in the changeable time/date -> for example: %customfile=test*xy.html% -> "*" is replaced by 20020120, 2002_03, 200201 or 2002 according to the used Templates ! - Possibility to leave out the single graphics at month - Possibility at wind distribution also let autom. create the week graphics. V2.81.2 2003-01-19 - Adaptations to CSV - IMPORT: Possibility, to take over only newer data, Possibility also to take over "over month" data in the import - file, Possibility to delete the import file after importing. and to last -> the CSV import file now is expected no more in the program folder!!! - Adaptations at "file watching" with CSV - file: Auto start now is supported if several records are contained in this file, these now will always taken over with "recording" start -> not only with "Autostart" (autom. converts generally is put in here, even if chosen not). - the Import-CSV - file now is always deleted after the takeover!! - new moonrise/moonset symbols, (thanks for it to Roland Schliwinski) - with the report, also "sun time" and "brightness" now are taken into account, if chosen with "HTML" - with individual display of sensors and wind speed/wind gusts now becomes the Beaufort value inserted (de-energized) - The preparation of the "bfttrend.gif" graphics is now independently from the mini display. - New control variables: -> Speech output Always Comma as "decimal separator" on %alwayssepcomma_on% Always Comma as "Dezimaltrennzeichen" off %alwayssepcomma_off% -> default Always minus as "Text" on %minus_text_on% Always minus as "Text" off %minus_text_off% -> default - Security system at "file watching" implemented (because of sporadic application erros) V2.81.1 2003-01-11 - Bug fix at variable %ws_normaltemp% and %ws_normaltempyear% - new variable: "Wind number values %wind_values%" = Number of the considered data "Wind force 0Bft..12Bft in percent of the representation time period %windbftproz_0%" and so on until %windbftproz_12%" Support of wind directional graphics of 10 degrees - steps: %windd10_gra% -> wind_00.gif.. wind_36.gif Support of wind directional graphics of 22.5 degrees - steps: %windd22_gra% -> wind00.gif.. wind16.gif (Respect lacking "_") - Consider! If you chooses for the preparation with the wind distribution "wind direction" + "wind force" and until now not "wind rose" as result graphics had chosen and the preset graphics "wind force" is, so, the "wind rose" always becomes created as the "directional graphics ddis_?????. gif". - Supports now own font color für Menu and Tables V2.81.0 2003-01-08 - Bug fix at the WMR-9x8 stations - in the Html-tables and selected sun time the sun time wasn't considers. - Bug fix: the WS2500 became with the "brightness - variables" doesn't consider - Possibility to show moonrise/moonset with a symbol (and/or) time in the day diagram, - Possibility to show new summary values in the min./max. Bar. - Possibility to produce one single week mini graphics automatically (with and without the individual week graphics). - with the WMx stations, now in "without interface operation" in the display bar also values can shown. - At "alarms", one can now choose, under file, options, "warning", whether is warned at the "event" only once or "continuously" (previous setting). - Bug fix at Wap files: removes "DEL" - the template files (template_d.txt usw.) now support also in the "Result" (%customfile=...%) folders (which, if missing, are created) - the Template-Control-files (template_d.txt, template_w.txt, template_m.txt, template_y.txt, template_t.txt template_noaa_m.txt, template_noaa_y.txt) allows now also a nesting over the variable "%openfile=...%" -> however max 3 (three) V2.80.9 2003-01-03 - Bug solved at the edition of the rain amount for month/year in the Html tables (was always 0,0 mm rain) -> Bug since V2.80.1/September 2002 -> please let patch these tables under "Internet", "Update tables/graphics... " (Start 2002 09 01) - Changes at the WMR stations and sun date representation in the minigraphics at "no sun time". - Standby system introduced for: "Update Internet files during recording" and the preparation of the "Internet-files" lasts longer as the calm "recording interval", the dates are now "buffert" for so long concluded to this updating. - At "Auto" and making speech file the finishing of the speech file is waited for before program end, however, a maximum of. 3 minutes (formerly only if also FTP transfer was activated) -> however not, if the user ends the program (therefore without "Auto"). V2.80.8 2002-12-30 - Bug at the recognition and creating of the 1st week of the year (Week belongs to the new year - day in the week still to old year) V2.80.7a 2002-12-29 Caution ! Change of the Javascript-file "libSMBM.js" - If you have done here own changes, you safeguard this file before installation of the new complete version ! (The start entries for French and Italienisch are considered now) - Program help and program description (Wswinen.pdf) corresponding to software available - smaller corrections with the international versions - the import interface accepts now also the sealevel - air pressure. (see under "File Watching") V2.80.7 2002-12-26 - minior correction for french language - program is now not "EXE-compressed" - necessary for the Windows-98/95/(ME?)-user V2.80.6 2002-12-25 - Additional display of the Mean-, Max value's of the wind and the wind process (=direct -> not back counted on 24 hours) at wind distribution - Possibility of the display of the snow line in the minidisplay - Bugfixes (for example at changes for Display Bar) - new export possibilities: Month export and "all dates export" now with fixed export format (.) - user-defined report file (E-mail) - Possibility to import the SkyView2001 Access databases (also automatically at program start) - Pseudo on-line operation (with WS2000,WS2500,WS2300) -> file watching/check of these stations and/or possibility to employ a CSV file as value handicap. - same behavior, how one of this ONLINE stations would be connected. - with possibility of the sensor correction (but no plausibility check) - at the WS2300 are taken over for the erroneous values, the previous, valid values (provided that which ones were available). -> with that, one has the possibility to duplicate his "weather station" !! - Since it is not possible under specific circumstances to impose the data format of the files 100 % to convert, there is the possibility to default the format (WS2000,WS2500,WS2300) now. - While converting directly to weather data file, only "newer dates" are taken over. - While converting one has to employ now also the possibility the sensor correction. - At "Auto recording" and file watching and/or WMx stations with Access logger file SkyView one can convert now "these" dates before automatically and/or let import "these" dates (Option for this purpose: File, Options) - Data sending to www.WxWatch.com (Virtual Weather Station) - with the file names into the Custom and Wap files now are allowed result files with path specification (%customfile= ...). If the indicated path/folder does not exist, it is attempted to create the path before. - Evapotranspiration calculation (thanks for this purpose at Bastian Rissling) - calculation must be activated at "statistical data"! ET is computed at 14:30, that is, "0,000 mm" is always ,before this time, the value !!!! - additional options for the "solar sensor" - New variables (for example month values also outside of the month observation period), - for "Sensor available" also nesting is now possible Example: %ws_availableX[2]=%curval[2]%,- - -% look for that too the example in "custom_.txt" - new contol variable (are valid only for %curval[x]% and %baro_station%) with other chosen unit than "Metric" -> necessary for import interface ! -> import interface: look at "watch.txt", needs Metric values (°C,hPa,mm,km/h) and the station air pressure (not related to sea level) V2.80.4 2002-10-12 - But at the minidisplay properties solved - "Esc" had the same function as "OK" - Fehler bei der Mini-Display-Einstellung beseitigt - "Abbruch" hatte die gleiche Funktion wie "OK" - the font size can be set (since the V2.80.3) to a maximum of 24 pixels. If the font size is chosen too highly, it is patched automatically so that the minidisplay fits also onto the screen. - Bug with rain amount and the WMx9x stations solved: When during the saving time range no rain value was obtained (= very bad reception and/or COM interface problems) the rain value was not extinguished, entered that is the old value again. - The autom. made single-/Mini graphics can be prepared now on max. size of 640 pixel - Possibility of the Max selection with "combined sensors" - New Time Controling Option: "Program end and restart" - The hourly recorded speech output can form one now also individually with the file "ws_speech1h.txt". - Change with the result language files: now a "x" is prefixed (necessary when text folder = data folder) V2.80.3 2002-10-01 - Possibility to use the Local Time in the APRS file (deselect UTC!) - Make the Wave file (provided that option chosen) also after the "read-out" - Program waits at the "Read-Out & Program end" and making of the Wave file for finishing of the Wave file before the program ends itself (but a maximum of. 180 second). - new variable "Senor available" (without Html) %ws_availableX[x]=Yes,No% and LongtimeSensor2 acting: %ws_available[T2]=Yes,No% - Bug with the variables and user handicap eliminates: if in the variable name a capital letter occurred, the result was not correct. - new option for the WM/WMR9x8 stations: Warning at switched off recording. The possible necessary Wave file "ws_alarm.wav" must be in the program folder. Activation under "File", "Options ..." and there under "Time controlling". Only for the WM?-Stations available/selectable! - Change of the showing of the rain amount in the Aktuell.htm with the option Number values in Aktuell.htm: "Hours" - when this option chosen, the rain amount of the preceded hour is shown now. - Speech output each hour: Spoken rain amount readjusted on rain amount last hour. If under Internet for the wind rate also Beaufort was chosen, this is "spoken" now too. If under Internet the air pressure trend was chosen, the air pressure change of the last 3 h. is "spoken" now besides. - The possibility of the conversion of the WS2300 files I lost in the V2.80.2 - is again there. (in fact not real, only the "dates" of the WS2300 dates were not announced anymore). V2.80.2 2002-09-21 - The former restriction to show the weather forecast ICONs only at a program window width >=863 pixel was changed to >=800 pixels! However, Values to be represented here, are covered over with that at the same position. - Change at the state variable (%ws_state_sens[x]%) - it is "filled" now also during the start of program, - Possibility to manage 3 own weather forecast texts - planned only for variable edition. - Not acting, own weather icons are faded out! (for example, if somebody lets announce the weather forecast of the WMR stations, at that the graphics are not available for unstable, snowfall, thundery and stormy) - Change in the converting-routine: If a RO-file is selected for converting, so there is reference shown. Files to the converting must not be set to ReadOnly ! - New option: "Update Internet files always after program start" Condition: On-line operation. - Support for voice output and WAVE/MP3 file generation: Possibility a voice output every full hour and/or. to make a WAVE file and possibly a MP3-Sound file of the meteorological data. Condition: A Speech-Engine (SAPI4) must be installed - the SAPI5 of WinXP is not supported! That is, if WinXP users want to use this function, must also install the SAPI4 - Engine. The registered users can load the necessary files for that, from the folder "Speech" and install the necessary files for that. The national language variants are additional necessary - find under the corresponding "country" folder. In addition, you find a link to a Micorsoft page here, where you can downlaod further files and help for the Speech-Engine. You can employ, of course, also a payable software that supports SAPI4! The file "lame_enc.dll" must be available - else WsWin does not start anymore. This DLL is necessary for the transformation of the WAVE files in MP3 files -> with that, file size saving of approx. 90 % ! Lame_enc.dll is released under GNU GPL - A Lot of thanks for this purpose at Alexei O. Sabline (a_sablin@mtu-net.ru). After the installation of the "Engine" always as the preset speaker is "Sam" = American, masculine speaker - can and should be changed under "Control" "Adjustments" "Speech" in the "Dropdown menu of the speaker selection. If no supplementary Engine is found during the start of program, that is shown there, a gross-steeply the language options' stands then not for the disposal (deactivated) A MP3-file is stored always in the HTML-folder! The file name of the MP3-file is derived by the WAVE-file ! For the generation of an own WAVE/MP3 file the file "ws_speech.txt" is planned (look at the sample file ws_speech_.txt) In this file are, as default, the "unit" edition interrupted. (-> %unit_off%) The voice output is supported with new variables: %unitnamelong[x]%, %wind_txtlong% Caution ! The average file length of a Wave file conducts ~700 KB, that a MP3 file from that ~70 KB.If you let make this file(s) over the "FTP times", the running of the FTP program is delayed for so long, to the generation of these files (Duration is with this example to approx. 30 sec.) concluded is. With FTP transfer and simultaneous voice output every hour, so the speech output occurs 1 minute later. V2.80.1 2002-09-07 - Possibility to show a weather forecast Icon in the Display Bar and with selection of own pictures. V2.80.0 2002-08-31 for the information: WsWin supports above 1200 variables ... one should read for this purpose once in the custom_en.txt (or progam help) ... - Removing the limitation of the activation of display and minidisplay only during "Recording". - The long promised final composure of the minidisplay finished with new options: for width there now a correction available, new color process (Gradient) for "pleasing" graphics Caution! Gradient-representation is default! absolutely read for this purpose in the program help ;) - Possibility to make a firmly defaulted only-text-weather data-report. - New combination of values in the Min./Max.-Bar. - new options with APRS file preparation -> air pressure possibility 5-signs -> you can use VWSaprs to send this file to Citizen Weather Observer - new variable: %alwaysseppoint_on% & %alwaysseppoint_off% - Scans whether data file is from WS2300 adapted - since presented, that the "file header" can have different formats. V2.80.ß7 2002-08-15 - In the "not registered Version" was the Menu "WS2500" closed - wasn't purposely! - The edition of "Numbers with decimal places" in the export and Internet part now use the defaultet "Comma separator" V2.80.ß6 2002-08-11 - New variable: %ws_available[x]=Yes,No% and %thermicstress_value% - if a file "longtime.html" will be found in the Html-folder, a selection will be included in the "Weather Data Menu" V2.80.ß5 2002-08-10 - Bug fix at combined sensors V2.80.ß4 2002-08-07 - Can take over the weather files of the weather stations WS2300 and/or WS2500 under "File" "Converting weather data". The data format should be recognized automatically and is announced then correspondingly. The "sun dates" are only taken over, if a "WS2500" is as Weather station selected. In case of incorporation of the dates of a WS2300 station every "weather station" can be chosen, however it must be noted, that the air pressure correction factor was entered correctly (under "Weather" "Location"), to be stored there the air pressure values as station air pressure (therefore no retention of the sealevel pressure!). Dates of the WS2300 before 1.1.2001 are put onto this date !!! Conversion: When select "Create weather data files", the data are "a l l w a y s" appended. Therefore you must choose the "correct" start date or delete the weather date file before "by hand" !!!! - Display of the brightness/cloudiness: if the sun correction is chosen, during the "correction" a "*" is announced with. For example "cloudy*" - Bug fix at rain values in the weather symbolic file and selected unit "inch". - Bug fix at uninitialized wind distribution graphics (only at pie view). - Bug fix at "Update Graphics/Tables" and week selection. - Possibility in the "time" view to overcome the day limit. - Adaptation at cloud height calculation - with entry in wswin.cfg [Settings] AltKondNiveau=0 -> return to the old calculation - Possibility to "remote-control" with the file "ws_controll.cfg" the program during the on-line operation. -> after processing of this file, this file is renamed to "ws_controll.old"! -> for supported "sections"+"entrys" look at "ws_controll_ex.cfg" - Adaptation while "scanning" the rain amount per hour for the historical data -> jetzt werden auch die WMx-9x8-Station berücksichtigt und zusätzlich bei den -> now also the WMx-9x8-Stations become considered and additional with the weather interfaces after the read-out, the current viewing period (only day) will be automaticly "scannt" - -> who "reads" out the dates once per day, is now current also at rain/h. - Heat index edition in the weather symbolic file when value < > outside temperature and besides the edition of the thermal stress chosen. - Email report preparation - Change of the viewing unit (km/miles) at visibilitiy: When "ft" and "knots" is choosen, the display show now "km". normally dependently on the attitude of the height unit > m = km ; ft = miles - Enlargement of the statistic graphics with integration in the weather data selection menu -> who would like to have computed "Wind Run", the corresponding option must activate in the statistics. -> In addition Consider: If in the graphics the month value are covered over, you have the possibility with the mouse (hand symbol) to move this to another position (for example to save the graphics) - For the entries of the weather data selection menu one can default other character size/font. - Preparation for sending of the dates to Citizen Weather Observer ("APRS") - new "Weather Calculator" ! -> if next to the values a "red call sign" is represented, one of the calm values is outside of the defaulted specifications: for example with the heat index the temperature must be in the range >= 26.7°C/80°F !!!! - "Cursor" is now in color and thick (color changeable) - in the wind distribution graphics now, besides the %-Value, the "Calm" is reported. -> adaptation with calm of 0 k.p.h. on <0.3m/s (is only with the ELV systems relevant, there only these devices register wind values < 1.1 km/h) -> all wind directions show 100 % - is, however, seen the difference of 100 - calm percentage. - new variable V2.80.ß2 2002-05-29 Attention: The graphics (for current.html) "hour.gif, day.gif, week.gif, month.gif, year.gif" are named and/or expected now as: houricon.gif, dayicon.gif, monthicon.gif, yearicon.gif Pleas rename this files in your Html-folder and transfer it too to your homepage!!!! - Bug at variables with user handicap and "=" in the text eliminated - Representation priority taken back at the temperature sensors (because of representation of combined sensor) - At "Update Graphics/Tables" the minigraphics generation functions now also at the months - Possibility to generate only "one" week graphics - For all available sensors you can choose now separately for the year graphics, whether the Min. /Max lines with are supposed to be represented. - New statistics graphics - All minigraphics/statistics graphics are considered/bound in now also in the weather date main menu. - New alarm option: Email -> functions only in case of available, activated Internet combination (provisional) (Look at properties "Control", "FTP adjustments", "Email") also txt-file attachements are supported: to model ws_email%index%.txt, this file must be in the data folder (can also one, through "customised. File" modified Files" be) - at which %index% is the index number of the corresponding sensor and/or "0" for email-testing. - Restructuring "Menu" -> "FTP" was deleted without being replaced V2.80.ß1 2002-05-09 - new single sensor of minigraphics and/or single sensor display (select sensors under "Internet" "Properties" "Sensors" - Possibility of the display of the sunshine times as an own diagram the scaling for that, is defaulted by me firmly this time - Possibility for the display-/ and/or Min./Max. bar to choose other background colors and/or other fonts/-colours. - Possibility for 3 view profiles. - Possibility to make automatically for each day some own graphics - Change/enlargement at the Properties "Internet" - Adaptation at the degree days - Display of the horizontal view sight in the weather forecast - Calculation of the mean values of the minimal-/Max values for the display period's (in tables). - Enlargement of the statistics around Min. /Max temperatures for month/year - new variable (for example Minimal average temperature) ... look at "custom_en.txt" - new variable Items with user handicap (%ws_isdaynight%, %ws_icewarning%) - all variable with "%unit_off%" consider this "counter" now too. - with the long-term values one can subsequently let register the hourly rain amount with the aid of the "cursor" in the day view - New option "end program around specific time" with possibility after that Windows restart or computer (provided that the built-in Motherboard supports the Power-Off-Mode). - possibility in the "Menu weather selection" to insert an own "footer text" for example for email address. - Measure against the "Readin problems" of the interfaces - error solved while making the wind direction distribution graphics - correction at the rain values - and/or defaulted year nought value V2.79.3 2002-04-10 - Correction at the "Long Time value" for the 2. Temp Sensor - there was the Date/Time from the MinValue duplicated to Date/Time for the MaxValue - When under Weather, Weather forecast the Option "show Weather forecast" is not selected, then in the Minidisplay the weather forecast icon (graphics) isn't more shown. - new variable for the highest sun elevation each day V2.79.2 2002-04-05 - Adaptation of the sun time correction during sun rise/sun set: the limit values do not refer anymore to the position of the sun, but onto a time - please check your entries. After my determination the "factor" must also be increased to "32". (concerns hardware Juergen) In this connection: If the sun value is announced in the Min./Max.Bar, also the position of the sun (Elevation) is shown here now in degree. - The comparison function for the months and years is again back (a lot of thanks for this purpose at Peter) - Change of the read-in routine for the weather station WM-918 V2.79.1 2002-04-01 - Bug at calculation of the max. Rain/Hour (Long time value) solved - Bug at the date of the "Long time value" and prepared 2 character Windows year date format (d.m.yy) solved. V2.79.0 2002-03-30 - Additional View of the wind distribution as Windrose, change to "GIF" graphics format and integration of the graphics in the weather selection menu - 2 additional user-definable limit values (<= and/or >=) - Enlargement in the statistics (around these dates to gotten, the year view must be chosen again) - Possibility of the edition of Head-/Foot line in the tables (for example for copyrights) - Change with the minidisplay - if sufficiently place, now the moon is represented, also without wind/baro graphics. - new variable V2.78.5a/b 2002-03-11/14 - Option for Computer with only 256 colour graphics-card: In the file Wswin.cfg in the section [MiniDisplay] add this entry (isn't autom. created!!) MiniDispGifArt=1 -> Default and/or no entry present Available values: 1: Reduce to optimal 256 color windows palette 2: Do not perform color reduction 3: Reduce to optimal 2^n color palette 4: Reduce to the Windows 20 color system palette 5: Reduce to the Windows 256 color halftone palette (Only works in 256 color display mode) 6: Reduce to the Netscape 216 color palette - Bug at air pressure data in APRS-File solved (bug since V2.78.0) V2.78.5 2002-03-09 - General Adaptation at year representation (no firm representation of 31 days monthly more). - Bug resolved for the first initialization of the correction factor for wind rate/gust (was set to -255 and/or 0 -> with that no recording of these sensors) - Adaptations of the HTM tables (also current.html) for representation with Netscape V4.x V2.78.4 2002-03-06 - Bug at year-average calculation solved. - Showing of the wind direcetion distribution corrected (bug since V2.78.2) - You can't show the "Enhanced Windows Meta Format" at wind direction graphic: Start program, end program, search in wswin.cfg for the "Key" Normalwmf=0 and change there to Normalwmf=0 -> then Standard -WMF-file will be created. You search for a very good Graphicviewer/converter, look at "IrfanView" V2.78.3 2002-03-05 - Correction at year rain amount. V2.78.2 2002-03-04 - Additional Properties (Print, Create Graphic, Change Sorting) at Distribution wind direction. V2.78.1 2002-03-03 - Bug at averages and rain amount calculation in the year-view solved. V2.78.0 2002-03-02 - Adaptation calculation Sealevel-pressure (no more factor /9 - as at the ELV weather stations) -> now factor 8.5 (entered site altitude is patched automatic onto this calculation). -> in addition, possibility the patched air pressure "temperature compensated" let represent -> and accuracy highest with that (Feeling as at the Davis VantagePro stations) with this calculation representation of the air pressure with a decimal place is readjusted on automatic. Attention! Attenion! Who wants the new calculation "temperature compensated" use, means, very probable (in most cases) must patch his "site height" after below and/or set to the actual site altitude. Here it is, in addition necessary, that the selected outdoor sensor supplies valid data !!! In case of use of this calculation means, the showing pressure at available "displays" are no more absolutely identical with the values in the software!!!!!!!! - Supports "Black" background color in minidisplay - state kind text is now a complementarily color for this purpose - Changes with display (Air pressure display) - Possibility to employ the new Wind chill calculation - Calculation and edition Heat, Cool-, and Growing-Degrees-Days with possibility to change the purchase temperature - Calculation and display of the wind direction distribution. - Adaptation of the calculation of the average values at the solar sensor - Possibility to reinitialize the sensor texts (for example at language alternation) - Possibility to change completely the units metrisch/us-units (and back) - New statistics: Rainy days at rain >0mm; >2mm; >20mm - Error correction at times 15 min, 1 hour->here no 23:00 for FTP transfer - Error correction at gusts of wind - automatic scaling functions now too - Change at plausibility correction - if a value "0" is received, then those values are now correted too -> formerly that ran out, that this sensor is not anymore available -> concerns mainly WM-918 - Display of the snow line in the weather forecast during the "winter time" - Preparation for standard deviation of the rain amount for month/year (still not ready ...) - Support for two new template files "template_m_noaa.txt" and "template_y_noaa.txt" - Possibility of the updating/generation of HTML table and graphics for the completely available database. - Possibility of entering of a "factor" for the sensor value correction (additional to the adjustment value) -> the adjustment values become during the "write-out" and "Import - employed here in selectable form". - smooth "sensor values" are made recognizable in the diagram with one now to additional "*" according to the sensor name. - almost all "new things" are supported with the corresponding variables V2.77.0 2002-01-13 - Showing of the Standard deviation for temperature in the Min.-/Max. Display Bar, into which month-/year- tables and as variables available -> condition temperature levels must under "Weather", "Statistic dates" "Properties" brought to be and the display of the temperature average line must be activated - new option for statitics dates: "read only" -> in case of choice of these options, older dates are not overwriten anymore -> also preparation for coming possibility these dates to editing/changing. (only currently to change directly in the file "ws_hist.txt") - At Comparison Viewing, you can for the compare data now a folder select -> with comparing (only graphics) the possibility exists to view the dates of two weather stations. - preparation for correction of the air pressure dates on site height with consideration of several factors. You can already see comparative value with new calculation under "Weather" "Location" ... (Thanks for this purpose at Mr Gebauer) -> with that the software will decollate, however, of the display of the "displays" that work with fixed adjustment values. V2.76.7a 2002-01-04 - Correction for jumping always to last year 2001 (only after online-reading) please select Year 2001 viewing once again (for correct values for rain/sun) V2.76.6/7 2002-01-03 - corrections at week displays (... w2002_52.htm) - additional variable at "month_only" merged (look at custom_en.txt) - adaptation because of not reseted sun month times - possibility to consider at the import sensor adjustment values. - Change "Clouds" in "Brightness" at weather symbolic file V2.76.5 2002-01-01 - error correction for Week selection (-"paging") for the year 2002 - additional options for minidisplay - you must control your selections!!! - Menu item "Statitics dates" (under "Weather") unlocked; if your values are not as expected here, choose the corresponding year representation still once - in addition, you must here default your years-/month average temperature levels - when you have entered the years-/month temperature averages, you can let represent this "value" besides in the diagram. - smaller changes (Weather forecast, weather conditions, sun time average calculation) - since the V2.76.4 a installed TCP/IP-protocol no more absolutely is necessary (however, the parts of the program that base on that, do not function then) V2.76.4 2001-12-23 - Error correction at "Cool days" in Month view V2.76.3 2001-12-14 - Support for modified humidity sensor as a solar sensor - new statistical value "Cool days Tmax < 10°C" - for evaluation, please select once Year view! - new variable "Ice warning/text" - for this purpose look at custom_en.txt Caution! The corresponding graphics "ice.gif" and "no_ice.gif" is not supplied !!!! -> For the text variable %icewarningtxt% a text is shown only in case of ice warning else "Blank" - New display of the wind direction as points (only in day representation) -> this display is turned on as a default and must be eliminated possible again (under "View" "Adjustments") - if files y2001.html (y2000.html and so on) are found in the Html folder, they are integrated into the "selection menu" under tables, corresponding year (for example 2001), months and here as "Summary". The example year template "template_y.txt" was changed, so that now y2001.html files are created. V2.76.2 2001-11-30 - error correction - now the user-defined files (htm/wml) are saved again - unlocked for the users the sun position correction factor, control range 5-50 -> necessary, if other "hardware" used than from Juergen (for example also at the WMR stations) standard: 18 (Circuit Juergen) - 12: circuit for WMR station V2.76.1 2001-11-29 - Change at modif. temp sensor (now >8 allowed) - Support for yesterday and week-day graphics - Changes at variables and rain/suntimes (now consider the control variable %unit_off%) V2.76.0a 2001-11-25 - No Pixel-correction at aktuell.gif (and all day graphics). V2.76.0 2001-11-24 - possibility for the graphics height to make a pixel correction. - new variables, error correction at variable longitude-/latitude(was exchanged). - additional sensor in minidisplay - change at alarm - change at sun time calculation when position of the sun correction chosen - change at location (other countries) and decimal place display at air pressure correction value - change at APRS/template menu (no input limit more, direct folder choice) - option menu split -> besides new properties menu for view - statistics: The values are announced since the last year representation -> the current day is not considered usually. V2.75.7 2001-11-12 - Change for saving the statistics dates - For template result files there is now a own folder - But with Template created "htm/html"-files are stored always in the Html folder - APRS-CallSign is safeguarded now and is available as variables - At "hour_only" is considered now, when "Gaps" are contained V2.75.6 2001-11-11 - moon representation adapted to the southern Hemisphere. - Option for sun time display between corrected and normal view possibility of different correction parameter for Sunrise and Sunset - adaptation of the standard display of air pressure: change from the last 6 hours onto the last ones 3 hours. - Introduction of statistics (Ice days, cold days, summer days, hot days) - all changes with supporting of corresponding new variables V2.75.5 2001-06-11 - Error correction at Templates and a Template line length > 255 chars V2.75.4 2001-11-04 - For the First Time you can for the solar sensor (modif. Temp.Sensor) a position of the sun correction for the sunshine times (- dration) activate: It becomes with a position of the sun >0° and < 12° and carried out Sunshine >0% a correction. In recognizable form at the diagram line, that in this case with the value, that was entered for "Sunshine" (for example 85 %) runs. The upper position of the sun value (12 degrees) can possible in a field of 6 - 24° to be varied. This option is not activated as default, there is required, by the extensive calculations, a computer of the 1GHz-class or a lot of patience (in particular at year representation). - new control variable "%ansitooem%" - only validly in template - for the professional (look at custom_en.txt) - change at sun/moon - if a value could not be computed at the sun dates (rise-/set-/twinlight-times), all times was no display (---) -> now only for the not computable value (mainly twilight astronomically in June) V2.75.3 2001-11-31 - Error correction in the display bar for standard sensors and "no display" - changes at %justify_on% - for example if sensors are not available, also positionings are carried out now - More Flexible File Allocation about "Template" - look at custom_en.txt - adapted the results at the Min/Max table and/or Html-tables for modified temperature sensor (no min values more, display of the sun hours) V2.75.2 2001-10-28 - Error correction at adaptation on summer time at the ELV interface (with OEM's) the correction of the read dates was ended an hour too late. - Error correction with timer with information of, for example 07:00 - 23:00, were carried out the "FTP operation" in spite of that from 00:00 V2.75.1 2001-10-27 - error correction at Wonderground - the times landed around 60 days in the past (while converting on UTC time forget on minutes back assign) - additional variable -> daylength, sungif and control variable justifyunit_on/off adaptation at the variables for wind text -> new example template_d_en.txt -> the functionality of the day template file uses and "Weather symbolic file = current.html" can replace with that. - Possibility of the display of the day length, sunrise and sunset in the day diagram - Possibility over "Weather data" to call an user-defined page (List/file/Html side). V2.75.0 2001-10-21 - Global adaptation to complete Timezone-Supporting with corresponding summer times. That is (and other) that the sun-/moon symbols in the diagram now according to the Daylight saving-/normal time to the date are represented. - Supporting of "Templates" and combined with that, by besides more than 200 (exactly 263) new variable look at "custom_en.txt" - Introduction of "Control variables" - with the now available variables you have "access" on almost the complete database of the program. - Possibility of the generation of an APRS file - In the menu "Sun/Moon" the Local Times are represented now as default (UTC time is optional). Besides that, are represented here the "twilight times" of the sun (civil nautical astronomical) and the position of the sun (elevation and azimuth). V2.74.3 2001-10-07 - support of the Degree for modif. temperature sensor in the chosen temp.-units (°C/°F) - besides for those ones 0 %/100 % values edition of the default values as "tool tip" -> with these changes, it it was again possible to pack the EXE file directly. V2.74.3 2001-09-30 - for the combined Sensor 8-15 and 9 Sensor-Working also allows the "Internet selection" - Mistake during the representation (no diagram lines more) eliminates. V2.74.2 2001-09-29 - error correction: For arbitrary moon-/sun dates (under Weather) the defaulted times were ignored -> always Current time - error correction () only ELV and OEM's concern, at the Export-/Import of the monthly file rain amount was falsified (the safety closure built-in in the summer for much too high rain amount was applied much too low) - now first effective, when rain amount > 300 mm per range - Recording interval changing now are considered at the sun times. - Changes at wind/gust for the weather stations WMR-9x8. - at an available modified Tempsensor as a solar sensor becomes now for the abbreviation no more H(umidity) but (defaulted to S)un, for the weather stations WMR-9x8 the modified temperature Sensor is now shown as a percentage instead of the actual humidity in the "online" display. - in the weather symbolic file the "rated time" is shown now -> new variable %daylightname% - for the Elv systems, there is now a selection for the combined sensors up to sensor 15. - Display of the rough cloud low limit in weather conditions and in weather forecast (computed from temperature/dew point). Function is from Christian Weber (Author of Meteorology master). Reference: Display times of the sun/moon symbol in the diagram: The times are computed always from the current viewing time point - for example, if for the viewing time point is now daylight saving there, the daylight saving time is included also for the period outside of the daylight saving time. V2.74.0 2001-09-14 - Support for French language. - New variables for solar sensor. - Program help now current. V2.73.7a 2001-09-10 - all texts translated also into the English and Italian language now - now the sunshine duration of the day, week, month, year's are shown the Min./Max.-Bar; and also cloudiness in "Text" V2.73.7 2001-09-09 Attention! At the moment not all german texts are translated! - For location coordinates also a "second" input is now possible -> please complement your dates according to that! - The menu item "Wireless-interface" was renamed to "Weather station" - Preparation for solar radiation support (modif. temp sensor -> illumination) -> new menu item "Weather station" "Special sensors" - Possibility for no "line representation" with wind direction and wind rate "0" - Possibility with the Htm tables and represented absolute humidity besides also the relative humidity represent. - Possibility at the month/year Htm tables besides the relevant day to let represent min./max. values (with date). - Possibiltiy to change the name for the start page (default: start.html) - Note, that this time the new, following options are activated as default: -> display sun rise/sun set symbol in the day diagram -> edition of the relative humidity in Htm tables, at chosen absolute humidity -> edition of the min./max.- values at month/year Htm tables. - new graphical symbol for stormy at weather forecast: "awind.gif" V2.73.6 2001-08-14 - Error correction: if there was in more than one customised Html/WML-files "time"-variables used, only in the first file the correct time values was inserted (error since V2.73.5) V2.73.5 2001-08-10 Consider! the TCP/IP-protocol must be installed !!!! - Error correction for the indoor sensor (=temp./hum.) for the selection in the start.html - no entries was generated. - Error correction for the export of the wireless-interface meteorological data (values over 20 k.p.h. for wind were stored only as "0") - concering only the wireless interface from ELV with OEM's. - changes during the read-out of the dates from the radio interfaces - former error correction at "Buffers empty error - was taken back - should be finished now by the actual routine without error. - changes at the moon-/sun time representations in the Html files (better worldwide time support) V2.73.4 2001-08-08 - New option for mini-display (but mini-display not yet ready) V2.73.3 2001-08-05 - Error correction for not visible minidisplay and weather station WMx-9x8 and the making the mini display graphics file -> Wind chill was not posted - Minidisplay graphics type changed from JPG ot GIF - Minidisplay graphics are stored now immediately after the read-out - (provided that option chosen) - With properties "without interface" and chosen option "Use Ftp" & "before transfer post the Internet files" & "before transfer post the customised Html-Files" and setting of the option in the wswin.cfg under [Settings] UpdateMoonSun=0 to "1" can one according to the chosen FTP time always a customised Html file with the current sun and moon times create (look at sunmoon.txt [possibly rename to custom.txt]). - one can limit the transfer times for Ftp (Period of/to for example from 07:00 - 00:20) - outside of this period more are not carried out a FTP-Uploads/Updatesn (Standard = 00:00 - 23:59 -> therefore always). - Adaptations during the updating of the Internet files at current recording (only WMx-9x8 concerns) - Program tested under Windows XP RC1 V2.73.2 2001-07-21 - Changes with the thermal stress index -> Personal good feel - new variables and graphics for personal good feel -> %thermicstressgif% graphics: "thermic.gif" = heat, "thermic0.gif" = Neutral, "thermic1.gif" = cold - direct choice of the sensor for Windchill-, dew point calculation (no more over wswin.cfg) - direct choice of the options for the Minimal-/Max-Bar groin (Air pressure gradient, wind in BFT, wind with direction) -> no more over wswin.cfg - new option for the minimal-/Max Bar and humidity: Possibility of the simultaneous representation of the absolute humidity and the relative air humidity (alternate) - Powerdown (command line parameter /down) should function now also under Windows 2000 - change during the summary-representation (Windchill,Dew point,Baro changes 1h) in the minimal-/Max Bar: The representation must be chosen now explicit, can chosen also for the positions 4-8 and shows now also the PMV value (=Predicted Mean Vote = Personal good feel) as well as the air pressure change of the last 6h. V2.73.1 2001-07-10 - Additional safety assessments with the autom. Convert of the very old ELV meteorological data's into the new format - with that, these dates should be converted now even if scrap values occur. - If near the Combined Sensors a sensor was changed, the indication with the new dates is posted after the leaving of the "option" menu. - Unlocked to autom. scaling also for the humidity sensors (because of absolute humidity) Consider ! The data for the absolute humidity must be recalculated each time. - Text export: with calm absolute humidity, also these data are exported now correspondingly (not only rel. humidity in [%]) Caution ! If you change the background color of the diagram (no more white) then the made graphics become importantly bigger. V2.73.0 2001-07-08 - New options at minidisplay (Representation problems not solved in case of enlargement yet ...) - Thermal stress index (new variable %thermicstress%) (new graphic thermic.gif) - Absolute humidity (g/m3) - Combination of 2 sensors - Background color diagram - New option for old interfaces (V1.x) V2.72.1 2001-07-01 - for the WMR-918/968 stations and the sensors 1 - 3 there was wrong Gif-file-names generated - corrected V2.72.0 2001-06-26 - changes for showing of the wind direction texts for NE-E, SE-S, SW-W, NW-N, also changed the correspondingly graphics. (please update your wind graphics (in file: winddirectionc_icons.zip) - Wind directions of "0 °" in the online operation are stored effective immediately from "360 °" as a wind direction. - Relief with Skyview log files also for the unformatted log files = Native-Format -> such files are accomplished if in the SkyView data logger folder the file "maxmin.bin" is missing -> logger program wasn't installed in the same folder, as the WeatherView software !? - Program completely now also in Italian (not program help file) Many thank to Prof. Giancarlo Grasso for his translation - changes while creating customised files - new option in wswin.cfg for WMR-918/968: Section [Settings] ForceDCF=1 -> with the received "hour information" from this weather station the PC clock will be allways updated (besides necessary: Option "Synchronize PC clock with DCF") - in the Weather Data main menu the selection frame windows will be now created with a fixed "width". - Correction: in the English version no entries were made in the StartMenue for air humidity. - Correction: With air pressure tendencies the "hPa"-values were spent in case of edition "inHg" and/or "mmHg". - minnor bugfixes - Changes at updating in FTP transfer - now each Option can be selected individual - no more generally everything was selected, when option "before transfer post the Internet files" was chosen. The chosen options under Internet have priority for the FTP transfer options, and when chosen there, the corresponding options are ignored under FTP. - Notice! There are two kinds for the program-minimization: - application minimize: with that the main window and the open windows are minimized - windows minimize: for example: minimizing only main windows and letting display-windows representedly. - in the Display one can let announce instead of the humidity also the dew point values of the chosen sensor - New freely configurable Mini-display: Font character size from 8 to 16 pt selectable every arbitrary font, which is installed, selectable bar display (Solution +/-10hPa) at the air pressure has following importance: of to the left of beginning air pressure -24 H, -12 H, -6 H, -3 H, -2 H, -1 H, current (=Deviation 0) . Following Restrictions still are with the Mini-Display: . If through the selections the "display becomes bigger" (other font, more sensor display) becomes partial . not posted correctly. . If the display is reduced by the configuration, the saved graphics file minidisplay.jpg didn't consider that. . If the position of that display was changed and then the configuration is started, then the position is put back onto the original start position. So that the changes become correctly effective, it is nesessarey to close the program and to restart it. When the "menu" is switched off, the position can not be changed anymore! V2.71.0 2001-06-02 - Changes at "FTP transfer" - here especially "before transfer post the current-/Internet files" - possibility to show the dewpoint for all available temp./humidity sensors in the "display" (instead of humidity) - changes for the edition of the weather forecast in the weather survey - possibility to listen/print the new-/full moon times for a whole year V2.70.5 2001-05-21 - error correction: the changes for those ones under "Internet" - "Sensors" chosen sensors was not saved V2.70.4 2001-05-13 - Correction of the display at the moon times, if no values can be computed and/or the times lie outside the current day's. - additional uploadtime of 5 min for FTP transfer - with the option "Use FTP" and the option "before transfer post the current/Internet-files", these files are updated in the indicated time period - with option "Use external FTP program", these files are transmitted then also correspondingly. V2.70.3 2001-05-07 - with the FTP-Option "before transfer post current-/Internet-files" the Weather symbolic file (current.html) and the customised html/wml-files are updated too, even if the Option under Internet is not selected. - new Option for the wswin.cfg: section: [Html] entry: DateTimeChange = 0 -> if someone will display the date before the time in the sun-/moon dates, must change here form "0" to "1" V2.70.2 2001-05-06 - Error correction for Showing the choose of external Ftp program - Secletion of 15 min for Ftp-transfer was never saved V2.70.1a 2001-05-03 - Button "Report" for weather watching reports was not active! (forgotten ...) - Now ADO is not anymore urgently necessary V2.70.1 2001-05-02 - Correction for weather symbolic file (current.html) - missing text for "rain last 24h" - only german version affected - Correction for rain, now the "Column" alone can be displayed again V2.70.0 2001-05-01 - Weather conditions - Adaptations for the Ftp transfer (aktuell-files post before Ftp) - Possibility of the calculation of the weather forecast - Sun-/Moon-data=calendar - new customised variables (among other things: %windd_gra%, %seaforce%) - the winddirection in the current/customised Html-files can now, with a new selectable option, are represented with corresponding wind direction graphics. - Plausibility controll of the DCF time for the ELV-(with OEM's) wireless interfaces for the setting of the PC time with the DCF-Time (is carried out only, if the DCF deviates from the PC time During max. +-2 hours) - UTC time error correction for Wonderground (Had forgot Daylight hour(s)) - On the user-defined pages, for not available sensors also the %variables% are replaced with " - - " - formerly the variable names conked out. - internal adaptations: Program should behave itself now again so, generated as with old compiler - Error correted, while converting the data from V1.15/1.14 (= old interface) - own folder for "wml-files" = WAP-Internet-pages - for all sensors (only at day representation) the diagram lines can be smoothed - Caution ! Change of the function of the function keys "F12" and "F5" -> "F5" = now refesh View -> "F12" = Day-Normalview -> "Shift F12" = Day 24h-View - Possibility at the "updated Internet files" to omit the GIF graphics - Experiment, to import also the unusual Weatherdisplay log files without error - Adapted Skyview log files, that also "omitted values - with reception problems", in particular near the 3 additional sensors, to be considered (Edition "0" and/or previous value). - Now with the import of Skyview log files only newer data are taken over (no more overwriting of available data) - and much more ... and a lot of things, which had to be displaced ... V2.62.7 2001-02-24 - now Help-file is current - direct support for WAP customised WML-files (see example wap_.txt) and read the info in the help file for "customised HTML files" You can consider WML files also without WAP Handy -> for example WEB-Browser OPERA from V4.x necessary ! - minor changes - Display of Rain amount in inch unlocked V2.62.6 2001-02-17 - In the 24-hour View one can choose now over "Choose period ..." the last hour to be represented (in the Online operation always the last hour to be represented is the "next current hour") -> for better use "Hour data -> Wunderground" - the display of the max. air pressure gradient with reference to an arbitrary hour can be disabled (only in wswin.cfg) - for weak computers - Javascript complements for "Start page" V2.62.5b 2001-02-15 --> the problems with windows2000 resolved, I hope, that I found all ... (There was problems under Windows2000 [Access violation ... after closing program], since least V2.51 ... - these problems are not found under Windows95/98) V2.62.5a 2001-02-14 - for the weeks, month's, year's min./max. data now also the corresponding times are shown (Min./Max. bar, table and/or Html tables) - Change at "hour data -> Wonderground", the announced hour dates will transmit there now for the selected day (no more yesterday data!!) - Indication of the atmospheric pressure change in the last hour (only day, week view) - Indication of the max. atmospheric pressure gradient with reference to an hour (only day-, week- view) - by Skyview log files the last choosen import folder is saved now. V2.62.5 2001-02-09 - in Skyview log files are considered at now too, when in that there are no min./max values. - Bug with Skyview log files eliminates - the 1. entry of the values was not imported. - Now there is the possibility for the "start.html" to enter a URL for the table/graphics - help-file not yet current ... V2.62.4 2001-02-04 - Option for additional display of wind/gust in Bft in the tables - Option for additional dispay of wind/gust in Bft in the weather survey (current.html) - Option for "blank" between the values and units (especially in customised Html files) - Option for additional air pressure trend values in the weather survey (current.html) - Display at wind/gust besides in "Bft" in that one Min./Max bar (deselectable in wswin.cfg) - Display of air pressure change (Delta with reference to last hour) at time and day view in the Min./Max.-bar - Possibility of smoothing of the air pressure curve in time and day view - Additional variable for Beaufort and air pressure tendency, as well as last week graphic and last month graphic (see custom_en.txt) - Displaying of the two announced days at "24h-View" - Example "current.txt" of substitute "current.html" complemented with the new variables ! - the diagram line of the outdoor temperature has priority before the Winchchill curve again here V2.62.3 2001-01-27 (will not be released as limited version) - minor changes - air pressure plausibilty control for WM-918 (was not done here) - display which weather station, when display chosen - possibility to save complete graphics with min-/max bar and display bar as gif file V2.62.2 2001-01-23 - Bugfix after rain calibration - unexplainable error during the paging through the data (->) defined - worked at rain representation as a column V2.62.1 2001-01-21 - Color selection for background color from Windows system color changed to right Web colors - Bug in week-, month-, year -view by weather stations WMx-918 corrected -> for Windchill and Dewpoint there was no values calculated -> Display "0" V2.62.0 2001-01-20 - for all standard Html files background colors and/or background pictures are now configurable (system-dependent the background pictures have priority). - for the representation of the rain amount in the "current.html" is checked now, whether the "Internet files are current", otherwise, the data are calculated again. - new option "to not update start.html in this case" - complete week data in the week view can be sent to "Wonderground" ! V2.61.3 2001-01-16 - Bug in the export with "fixed column spacing" eliminates - Bug at the variable %ws_weekgif% eliminates V2.61.2 2001/01/14 - new variables (see custom_en.txt) V2.61.1 2001/01/13 - Once more changes for Windows2000/WMR-91x stations. - Variable added V2.61.0 2001/01/13 (will not be released as limited version) - Support for own WEB pages (support up to 393 variables) -> see custom_en.txt - new option for aktuell.htm -> data for each hour - Consideration of rain during the day at rain-days - With the new Compiler there are now 400 000 entries in the interface-protocoll available (formerly only 65 000). - Through adaptation to new compiler the error at converting and free harddisk space > 2 GB war eliminated - Adaptation to new compiler V2.60.3 2001/01/03 (only for registered user) - Consideration of rain change during the day for week-,month-,year rain amount - After the hardware test for WS2000_PC interface the error number is now again visible (was cut off) V2.60.2 2001/01/01 - bug in editing of the WMx-91x-Data eliminated - bug eliminated, if Option "update Internet files automatic" was selected, the progam hung in the new year (the error was week 0, but there is no such week) V2.60.0 2000/12/29 - Rain amount adapted -> from this version the data files with older versions are, in particular also with the 16-bit-Version, no more compatible, - start.html can be adapted with the start.txt onto own needs. - At 0 Grad also a correct Dew point value is spent now - With importing of the Skyview log files also the inside sensors are stored now. - In the online operation a changing of WMR-918 to WMR-968 is and vice versa possible. Formerly only a changing was supported from WMR-918 to WMR-968. - Valid-value-change for wind and gusts for the station WMx-918 are reduced from 45 k.p.h.to 30 k.p.h. . - Single option per sensor for plausibilty correction are stored now - Inadmissible scale values (=0) for increment are patched during the start V2.51.4 2000/12/07 - english help-file available V2.51.3 Status 2000/11/28 - german help-file updatet V2.51.3 2000/11/28 - now is by the alarm values and there by max-value the "Green display" also selectable. is for both the min. and max values the "Green display" choosed, then the values between this points are faded green. - changes for 2 monitor operation and full display mode - new function "Cursordata -> Wunderground" here you can transfer the data under the "Cursor" to your Wondergrond-side V2.51.2 2000/11/23 - On the Huger weatherstation the DTR-line is switched on; with this, the passthrough operation with the Skyview data-logger is possible. - UTC time is fetched at every start from windows environment - can be modified, however. - Changes during the start because of not available printer (Printer inquiry occurs now completely at the End during the initialization of the program). V2.51.1 2000/11/20 - supports WMR-968